TC140 Datasheet | Unknown Manufacturer

Description : The TC-140 series offers performance for short-term stability, phase noise, aging and temperature stability normally only associated with Oven Controlled Crystal Oscillators, while consuming typically <20 m A. Features : - - - - - Stratum 3 option Frequency from 0.5 to 160 MHz “1 ppm Forever” option TTL, HCMOS and Sinewave Over 600,000 units produced Performance Characteristics Parameter Standard Frequencies: Supply Voltage (Vdd): (other options are available upon request) Characteristics 4.096, 10.00, 12.80, 13.00, 16.384, 19.44, 20.00, 20.48 MHz Available from 0.5 MHz to 160 MHz 12.0 Vdc ±5% 5.0 Vdc ±5% Current draw will vary greatly depending on frequency and output type. For this series TCXO typical current draw will be about 20 m A. Please consult the factory about your exact current requirements. A = HCMOS / ACMOS B = 10 TTL G = 0 d Bm to +6 d Bm J = +7 d Bm to +13 d Bm 0.5 0.5 3.0 3.0 to to to to 160 160 100 100 MHz MHz MHz MHz (+12 Vdc only) Current: Output: Temperature Stability: B-1PM - ±1.0 x 10-6 over 0°C to +50°C, 10 years and initial accuracy Note: Not all stabilities are available B-207 - ±2.0 x 10-7 over 0°C to +50°C, Aging <2 ppm/10 years with all frequency/output binations. B-ST3 - Stratum 3 over 0°C to +50°C, - See note below Please consult the factory. B-4PM - ±4.6 x 10-6 over 0°C to +50°C, 10 years and initial accuracy C-1PM - ±1.0 x 10-6 over 0°C to +70°C, 10 years and initial accuracy C-ST3 - Stratum 3 over 0°C to +70°C, - See note below C-507 - ±5.0 x 10-7 over 0°C to +70°C, Aging <2 ppm/10 years C-4PM - ±4.6 x 10-6 over 0°C to +70°C, 10 years and initial accuracy F-106 - ±1.0 x 10-6 over -40°C to +85°C, Aging <2 ppm/10 years F-4PM - ±4.6 x 10-6 over -40°C to +85°C, 10 years and initial accuracy - STRATUM 3 per GR-1244-CORE Table 3-1 Total Stability: <±4.6 x 10-6 for all causes and 10 years Total Stability: <±3.7 x 10-7 for all causes and 24 hours Note: Tighter stabilities and wider temperature ranges are available, please...