2 4 1 3
www.DataSheet4U.com
TP337
thermistor pin thermistor pin (GND) thermopile output pin (+) thermopile output pin (-)
Thermistor Thermopile
2(R)
3(V-)
1(V+) 4(GND)
BACKSIDE VIEW
SIDE VIEW
Order information : TP337 : A B E F : : : : Standard filter (5-14 m), window size=2.57mm (diame
Key Features
TP337
The thermopile sensor consists of a series of 116 thermoelements, forming a sensitive region size of 545 m (diameter). The sensor is hermetically sealed into a TO-5 metal housing, with an optical filter. This standard filter allows measurements to be made in the spectral range above 5 m wavelength. The thermosensor exhibits an almost white noise, comparable to an ohmic resistance. It has a constant signal versus frequency up to its frequency limit, and is directly proportional to incide.
Note: Below is a high-fidelity text extraction (approx. 800 characters) for
TP337. For precise diagrams, and layout, please refer to the original PDF.
Thermopile Infrared Sensor Features TP337 The thermopile sensor consists of a series of 116 thermoelements, forming a sensitive region size of 545m (diameter). The sen...
View more extracted text
elements, forming a sensitive region size of 545m (diameter). The sensor is hermetically sealed into a TO-5 metal housing, with an optical filter. This standard filter allows measurements to be made in the spectral range above 5 m wavelength. The thermosensor exhibits an almost white noise, comparable to an ohmic resistance. It has a constant signal versus frequency up to its frequency limit, and is directly proportional to incident radiation. The thermopile sensors are featured with an additional temperature reference resistor on the same chip. The standard version of temperature reference www.DataSheet4U.com resistor i