AIF25H300N-L
Features
- 600W Continuous power at 100°C baseplate temperature
- 108W/in3 (6.6W/cm3)
- High efficiency
- up to 90%
- Low output ripple and noise
- Positive and Negative enable function
- Excellent transient response
- OVP, OCP, V Adj control with ALPTM analog mode linear control, or through I2C bus with digital mode control.
- Paralleable with accurate current sharing
- EU Directive 2002/95/EC pliant for Ro HS
Input range Input surge Efficiency
- 420 VDC 450V / 100ms 90%@5.0V (Typical) 0.2% typical down to no load 0.2% typical 100m V typical (below 5V); 2% typical (5V and above) Up to 0.5V +/-20% for 5V and above; +10%/ -50% for below 5V 5% max for 3.3V and above, 150m V for 1.8V, deviation with 25% to 75% full load 250 μS (max) recovery 3% typical 115% Vo (nominal) 115% Io maximum
Output
Load Regulation Line Regulation Noise / Ripple Remote sense Output voltage adjust range Transient Response Current Share Accuracy Overvoltage Protection Current Limit
Control
Voltage Adjust 80...
