Datasheet4U Logo Datasheet4U.com

EN25B10 - 1 Mbit Serial Flash Memory

General Description

The EN25B10 is a 1M-bit (128K-byte) Serial Flash memory, with advanced write protection mechanisms, accessed by a high speed SPI-compatible bus.

The memory can be programmed 1 to 256 bytes at a time, using the Page Program instruction.

Key Features

  • Single power supply operation - Full voltage range: 2.7-3.6 volt.
  • 1 M-bit Serial Flash - 1 M-bit/128 K-byte/512 pages - 256 bytes per programmable page.
  • High performance - 75MHz clock rate.
  • Low power consumption - 5 mA typical active current - 1 μA typical power down current.
  • Flexible Sector Architecture: - Two 4-Kbyte, one 8-Kbyte, one 16Kbyte,three 32-Kbyte sectors.
  • Software and Hardware Write Protection: - Write Protect all or portion of.

📥 Download Datasheet

Full PDF Text Transcription for EN25B10 (Reference)

Note: Below is a high-fidelity text extraction (approx. 800 characters) for EN25B10. For precise diagrams, tables, and layout, please refer to the original PDF.

www.DataSheet4U.com EN25B10 EN25B10 1 Mbit Serial Flash Memory with Boot and Parameter Sectors FEATURES • Single power supply operation - Full voltage range: 2.7-3.6 volt...

View more extracted text
RES • Single power supply operation - Full voltage range: 2.7-3.6 volt • 1 M-bit Serial Flash - 1 M-bit/128 K-byte/512 pages - 256 bytes per programmable page • High performance - 75MHz clock rate • Low power consumption - 5 mA typical active current - 1 μA typical power down current • Flexible Sector Architecture: - Two 4-Kbyte, one 8-Kbyte, one 16Kbyte,three 32-Kbyte sectors • Software and Hardware Write Protection: - Write Protect all or portion of memory via software - Enable/Disable protection with WP# pin • High performance program/erase speed Byte program time: 7µs typical Page program time: 1.