EN25B16
Overview
The EN25B16 is a 16M-bit (2048K-byte) Serial Flash memory, with advanced write protection mechanisms, accessed by a high speed SPI-compatible bus. The memory can be programmed 1 to 256 bytes at a time, using the Page Program instruction.
- Single power supply operation - Full voltage range: 2.7-3.6 volt
- 16 M-bit Serial Flash - 16 M-bit/2048 K-byte/8192 pages - 256 bytes per programmable page
- High performance - 100MHz clock rate
- Low power consumption - 5 mA typical active current - 1 μA typical power down current
- Flexible Sector Architecture: - Two 4-Kbyte, one 8-Kbyte, one 16-Kbyte,one 32-Kbyte, and thirty one 64-Kbyte sectors
- Software and Hardware Write Protection: - Write Protect all or portion of memory via software - Enable/Disable protection with WP# pin
- High performance program/erase speed Byte program time: 7µs typical Page program time: 1.5ms typical Sector erase time: 300 to 800ms typical Chip erase time: 18 Seconds typical
- Minimum 100K endurance cycle
- Package Options - 8 pins SOP 200mil body width - 8 contact VDFN - 16 pin SOP 300mil body width - All Pb-free packages are RoHS compliant
- Commercial and industrial temperature Range
