Datasheet4U Logo Datasheet4U.com

FT311D - USB Android Host

Datasheet Summary

Description

of each function please refer to Section 4.

Features

  • Single chip USB to selectable interface.
  • Entire USB protocol handled on the chip. No USB specific firmware programming required.
  • Interface options selectable via 3 mode select.
  • pins.
  • 7 GPIO lines interface option.
  • Basic UART interface with RXD, TXD, RTS, CTS pins option.
  • TX_ACTIVE signal for controlling transceivers on RS485 interfaces.
  • 4 PWM channels option.
  • I2C master interface option.
  • SPI Slave int.

📥 Download Datasheet

Datasheet preview – FT311D

Datasheet Details

Part number FT311D
Manufacturer FTDI
File Size 1.25 MB
Description USB Android Host
Datasheet download datasheet FT311D Datasheet
Additional preview pages of the FT311D datasheet.

📁 Similar Datasheet

  • FT3103 - Three Phase Sensorless BLDC Motor Controller (Fortior)
  • FT3106 - Three Phase Sensorless BLDC Motor Controller (Fortior)
  • FT3107T - Three Phase Sensorless BLDC Motor Controller (Fortior)
  • FT310N - Sensorless BLDC Motor Controller (Fortior)
  • FT310S - Sensorless BLDC motor controller (Fortior)
  • ft3128 - High Power Stereo Class-D Audio Power Amplifier (Fangtek)
  • ft3157 - Low-Ohmic Single-Pole Double-Throw Analog Switch (Fangtek)
  • FT3168 - Self-Capacitance Touch Controller (FocalTech)
  • FT3000AV - Phase Control SCR (Powerex Power Semiconductors)
  • FT3003 - Three Phase Sensorless BLDC Motor Controller (Fortior)
Other Datasheets by FTDI

Full PDF Text Transcription

Click to expand full text
DS_FT311D USB ANDROID HOST IC Datasheet Version 1.3 Document No.: FT_000660 Clearance No.: FTDI# 305 Future Technology Devices International Ltd. FT311D (USB Android Host IC) The FT311D is a Full Speed USB host specifically targeted at providing access to peripheral hardware from an Android platform with a USB device port. The device will bridge the USB port to six user selectable interface types and has the following advanced features:  Single chip USB to selectable interface.  Entire USB protocol handled on the chip. No USB specific firmware programming required.  Interface options selectable via 3 mode select  pins.  7 GPIO lines interface option  Basic UART interface with RXD, TXD, RTS, CTS pins option.
Published: |