NC7SZ11
NC7SZ11 is TinyLogic UHS 3-Input AND Gate manufactured by Fairchild Semiconductor.
Description
The NC7SZ11 is a single 3-input AND Gate from Fairchild’s Ultra High Speed Series of Tiny Logic. The device is fabricated with advanced CMOS technology to achieve ultra high speed with high output drive while maintaining low static power dissipation over a very broad VCC operating range. The device is specified to operate over the 1.65V to 5.5V VCC range. The inputs and output are high impedance when VCC is 0V. Inputs tolerate voltages up to 7V independent of VCC operating voltage.
Features s Space saving SC70 6-lead package s Ultra small Micro Pak leadless package s Ultra High Speed; t PD 2.7 ns Typ into 50 p F at 5V VCC s High Output Drive; ±24 m A at 3V VCC s Broad VCC Operating Range; 1.65V to 5.5V s Power down high impedance inputs/output s Overvoltage tolerant inputs facilitate 5V to 3V translation s Patented noise/EMI reduction circuitry implemented
Ordering Code:
Order Number NC7SZ11P6X NC7SZ11L6X Package Number MAA06A MAC06A Product Code Top Mark Z11 E7 Package Description
6-Lead SC70, EIAJ SC88, 1.25mm Wide 6-Lead Micro Pak, 1.0mm Wide Supplied As 3k Units on Tape and Reel 5k Units on Tape and Reel
Logic Symbol
IEEE/IEC
Connection Diagrams
(Top View)
Pin Descriptions
Pin Names A, B, C Y Description
Inputs Output
Pin One Orientation Diagram
Function Table
Y = ABC Inputs A X X L H B X L X H C L X X H Output Y L L L H Pad Assignment for Micro Pak
AAA represents Product Code Top Mark
- see ordering code. Note: Orientation of Top Mark determines Pin One location. Read the Top Product Code Mark left to right, Pin One is the lower left pin (see diagram)
H = HIGH Logic Level L = LOW Logic Level X = Either LOW or HIGH Logic Level
(Top Thru View)
Tiny Logic is a registered trademark of Fairchild Semiconductor Corporation. Micro Pak is a trademark of Fairchild Semiconductor Corporation.
© 2003 Fairchild Semiconductor Corporation
DS500465
.fairchildsemi.
Absolute Maximum Ratings(Note 1)
Supply Voltage (VCC ) DC Input Voltage (VIN) DC...