24C64 Datasheet PDF - FairchildSemiconductor 64K-Bit Standard 2-Wire Bus Interface Serial EEPROM Specs

24C64 - 64K-Bit Standard 2-Wire Bus Interface Serial EEPROM

Datasheet Summary

Description

FM24C64 is a 64Kbit CMOS non-volatile serial EEPROM organized as 8K x 8 bit memory.

This device confirms to Extended IIC 2-wire protocol that allows accessing of memory in excess of 16Kbit on an IIC bus.

Features

I Extended operating voltage: 2.5V to 5.5V I Up to 400 KHz clock frequency at 2.5V to 5.5V I Low power consumption.
0.5mA active current typical.
10µA standby current typical.
1µA standby current typical (L version).
0.1µA standby current typical (LZ version) I Schmitt trigger inputs I 32 byte page write mode I Self timed write cycle (6ms typical) I Hardware Write Protection for the entire array I Endurance: up to 100K data changes I Data Retention: Greater th.

Datasheet Details

Part number	24C64
Manufacturer	FairchildSemiconductor
File Size	100.56 KB
Description	64K-Bit Standard 2-Wire Bus Interface Serial EEPROM
Datasheet	24C64 Datasheet
Additional preview pages of the 24C64 datasheet.

📁 Similar Datasheet

24C64 - 64K EEPROM (ETC)

24C64 - 64-Kbit EEPROM (STMicroelectronics)

24C64 - 2-Wire Serial EEPROM (ATMELCorporation)

24C64 - Standard EEPROM (Siemens)

24C64 - 2-WIRE SERIAL CMOS EEPROM (Bookly Micro)

24C64 - Two-wire Serial EEPROM (LRC)

24C64 - 64Kb FRAM Serial Memory (Ramtron)

24C64A - Two-wire Serial EEPROM (ATMEL Corporation)

24C64L - FM24C64L (Fairchild Semiconductor)

24C64WP - 64-Kbit EEPROM (STMicroelectronics)

Full PDF Text Transcription

Click to expand full text

FM24C64 – 64K-Bit Standard 2-Wire Bus Interface Serial EEPROM December 2001 FM24C64 – 64K-Bit Standard 2-Wire Bus Interface Serial EEPROM General Description FM24C64 is a 64Kbit CMOS non-volatile serial EEPROM organized as 8K x 8 bit memory. This device confirms to Extended IIC 2-wire protocol that allows accessing of memory in excess of 16Kbit on an IIC bus. This serial communication protocol uses a Clock signal (SCL) and a Data signal (SDA) to synchronously clock data between a master (e.g. a microcontroller) and a slave (EEPROM). FM24C64 is designed to minimize pin count and simplify PC board layout requirements. FM24C64 offers hardware write protection where by the entire memory array can be write protected by connecting WP pin to VCC.

Published: Mar 23, 2005 |