Datasheet4U Logo Datasheet4U.com

DM74ALS5245-1 - Octal 3-STATE Transceiver

Description

This octal bus transceiver is designed for asynchronous two-way communication between data buses.

The inputs include hysteresis which provides improved noise rejection.

Features

  • the same performance as the ALS5245 with the addition of increased current drive capability to meet the requirements of various bus architectures. The recommended maximum IOL is increased to 48 mA. Features n Input Hysteresis n Low output noise generation n High input noise immunity n Advanced oxide-isolated, ion implanted Schottky TTL process n Switching specification guaranteed over the full temperature and VCC range n PNP inputs to reduce input loading n Maximum IOL is increased to 48 mA for.

📥 Download Datasheet

Datasheet preview – DM74ALS5245-1

Datasheet Details

Part number DM74ALS5245-1
Manufacturer Fairchild Semiconductor
File Size 119.87 KB
Description Octal 3-STATE Transceiver
Datasheet download datasheet DM74ALS5245-1 Datasheet
Additional preview pages of the DM74ALS5245-1 datasheet.

📁 Similar Datasheet

  • DM74ALS1011A - Triple 3 Input AND Buffer (National)
  • DM74ALS1242 - Quad Bidirectional Bus Drivers (National Semiconductor)
  • DM74ALS1242A - Quad Bidirectional Bus Driver (National)
  • DM74ALS132 - DM74ALS132 Quad 2-Input NAND Gate with Schmitt Trigger Inputs (National Semiconductor)
  • DM74ALS138 - 3 to 8 Line Decoder/Demultiplexer (National Semiconductor)
  • DM74ALS14 - Hex Inverter with Schmitt Trigger Inputs (National Semiconductor)
  • DM74ALS151 - 1 of 8 Line Data Selector/Multiplexer (National Semiconductor)
  • DM74ALS1620 - Octal Tri-State Bus Transceivers (National)
  • DM74ALS390 - Dual 4-Bit Decade Counters (National Semiconductor)
  • DM74ALS996 - D Type Edge Triggered Readback Latches (National)
Other Datasheets by Fairchild Semiconductor
  • DM74ALS5245 - Octal 3-STATE Transceiver
  • DM74ALS520 - 8-Bit Comparator
  • DM74ALS521 - 8-Bit Comparator
  • DM74ALS533 - Octal D-Type Transparent Latch with 3-STATE Outputs
  • DM74ALS534 - Octal D-Type Edge-Triggered Flip-Flop
  • DM74ALS540A - Octal Inverting Buffer and Line Driver with 3-STATE Outputs
  • DM74ALS541 - Octal Buffer and Line Driver with 3-STATE Outputs
  • DM74ALS563A - Octal D-Type Transparent Latch with 3-STATE Output

Full PDF Text Transcription

Click to expand full text
DM74ALS5245/74ALS5245-1 Octal TRI-STATE Transceiver March 1998 DM74ALS5245/74ALS5245-1 Octal 3-STATE Transceiver General Description This octal bus transceiver is designed for asynchronous two-way communication between data buses. The inputs include hysteresis which provides improved noise rejection. Data is transmitted either from the A bus to the B bus or from the B bus to the A bus depending on the logic level of the direction control (DIR) input. The device can be disabled via the enable input (G ) which causes the outputs to enter the high impedance mode so the buses are effectively isolated. The ALS5245-1 features the same performance as the ALS5245 with the addition of increased current drive capability to meet the requirements of various bus architectures.
Published: |