FNA51560T1/T3
Motion SPM® 55 Series
June 2014
Features
• UL Certified No. E209204 (UL1557)
• 600 V - 15 A 3-Phase IGBT Inverter Including Control
IC for Gate Drive and Protections
• Low-Loss, Short-Circuit Rated IGBTs
• Separate Open-Emitter Pins from Low-Side IGBTs for
Three-Phase Current Sensing
• Active-HIGH interface, works with 3.3 / 5 V Logic,
Schmitt-trigger Input
• Inter-Lock Function
• HVIC for Gate Driving and Under-Voltage Protection
• HVIC Temperature-Sensing Built-In for Temperature
Monitoring
• Optimized for 5 kHz Switching Frequency
• Isolation Rating: 1500 Vrms / min.
General Description
FNA51560T1/T3 is a Motion SPM 55 module providing a
fully-featured, high-performance inverter output stage for
AC Induction, BLDC, and PMSM motors. These modules
integrate optimized gate drive of the built-in IGBTs to
minimize EMI and losses, while also providing multiple
on-module protection features including under-voltage
lockouts, inter-lock function, over-current shutdown,
thermal monitoring of drive IC, and fault reporting. The
built-in, high-speed HVIC requires only a single supply
voltage and translates the incoming logic-level gate
inputs to the high-voltage, high-current drive signals
required to properly drive the module's robust short-
circuit-rated IGBTs. Separate negative IGBT terminals
are available for each phase to support the widest
variety of control algorithms.
Applications
• Motion Control - Home Appliance / Industrial Motor
Related Resources
Figure 1. Package Overview
Package Marking and Ordering Information
Device
FNA51560T1
FNA51560T3
Device Marking
FNA51560T1
FNA51560T3
Package
SPMFA-B20
SPMFA-A20
Packing Type
RAIL
RAIL
Quantity
13
13
©2014 Fairchild Semiconductor Corporation
FNA51560T1/T3 Rev. C0
1
www.fairchildsemi.com
