Datasheet4U Logo Datasheet4U.com

FXL2TD245 - Low Voltage Dual Supply 2-Bit Signal Translator

Description

The FXL2TD245 is a configurable dual-voltage-supply translator designed for both uni-directional and bi-directional voltage translation between two logic levels.

The device allows translation between voltages as high as 3.6V to as low as 1.1V.

Features

  • Bi-directional interface between any 2 levels from 1.1V to 3.6V.
  • Fully configurable: Inputs track VCC level.
  • Non-preferential power-up sequencing; either VCC may be powered-up first.
  • Outputs remain in 3-STATE until active VCC level is reached.
  • Outputs switch to 3-STATE if either VCC is at GND.
  • Power-off protection.
  • Control inputs (T/Rn, OE) levels are referenced to VCCA voltage.
  • Packaged in the Chipscale MicroPak10 (1.6mm x 2.1mm).
  • ESD protectio.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
FXL2213 Wire Wound Molded SMD Power Inductors CJIANG
FXL0412 Wire Wound Molded SMD Power Inductors CJIANG
FXL0420 Wire Wound Molded SMD Power Inductors CJIANG
FXL0518 Wire Wound Molded SMD Power Inductors CJIANG
FXL0530 Wire Wound Molded SMD Power Inductors CJIANG

Other Datasheets by Fairchild (onsemi)

Part Number Description
FXL2T245 Low Voltage Dual Supply 2-Bit Signal Translator
FXL2SD106 Low Voltage Dual Supply 6-Bit SD Interface Voltage Translator
FXL3SD206 Two-Port SDIO Mux/Demux Level-Shifting Voltage Translator
FXL4245 Low Voltage Dual Supply 8-Bit Signal Translator
FXL4T245 Low Voltage Dual Supply 4-Bit Signal Translator

Full PDF Text Transcription

Click to expand full text
www.DataSheet4U.com FXL2TD245 Low Voltage Dual Supply 2-Bit Signal Translator with Configurable Voltage Supplies and Signal Levels and 3-STATE Outputs and Independent Direction Controls November 2006 FXL2TD245 Low Voltage Dual Supply 2-Bit Signal Translator with Configurable Voltage Supplies and Signal Levels and 3-STATE Outputs and Independent Direction Controls General Description The FXL2TD245 is a configurable dual-voltage-supply translator designed for both uni-directional and bi-directional voltage translation between two logic levels. The device allows translation between voltages as high as 3.6V to as low as 1.1V. The A Port tracks the VCCA level, and the B Port tracks the VCCB level. This allows for bi-directional voltage translation over a variety of voltage levels: 1.2V, 1.
Published: |