FP6182 Datasheet | Feeling Technology

Description The FP6182 is a buck regulator with a built in internal power MOSFET. It achieves 2A continuous output current over a wide input supply range with excellent load and line regulation. Current mode operation provides fast transient response and eases loop stabilization. The device includes cycle-by-cycle current limiting and thermal shutdown protection. The regulator only consumes 25μA supply current in shutdown mode. The FP6182 requires a minimum number of readily available external ponents to plete a 2A buck regulator solution. Features - 2A Output Current - 0.22Ω Internal Power MOSFET Switch - Stable with Low ESR Output Ceramic Capacitors Up to 95% Efficiency - 25μA Shutdown Mode Current - Fixed 380KHz Frequency - Thermal Shutdown - Cycle-by-Cycle Over Current Protection - Wide 4.75 to 23V Operating Input Range - Output Adjustable From 1.222 to 16V - Available SOP-8L Package - Under Voltage Lockout Applications - Distributed Power Systems - Battery Charger Network Cards - Pre-Regulator for Linear Regulators - DSL Modems Typical Application Circuit 12V BS IN VOUT 12V FB GND P Last saved by Hsieh_hp This datasheet contains new product information. Feeling Technology reserves the rights to modify the product specification without notice. No liability is assumed as a result of the use of this product. No rights under any patent acpany the sales of the product. Website: http://.feeling-tech..tw Rev. 0.61 1/13 FP6182 Function Block Diagram Pin Descriptions SOP-8L Top View BS IN SW GND 1 2 3 4 8 Name No. I /...