Datasheet4U Logo Datasheet4U.com

FP6861 - Single-Channel 1.1A USB High-Side Power Switch with Flag

General Description

The FP6861 is a single channel USB power switch which is optimized for the self-powered and the bus-powered Universal Serial Bus (USB) applications.

It is cost-effective, low voltage and equipped single N-Channel high-side MOSFET switch.

Key Features

  • include under-voltage lockout (UVLO) to ensure that the device keeps off until input a valid voltage, thermal shutdown to prevent catastrophic switch failure from high loading current and fault current is limited to typically 1.5A for in accordance with the USB power requirements. Soft-start to limit inrush current during plug-in and lower quiescent current as 33μA making this device ideal for portable battery-operated equipment. The FP6861 is available in SOT-23-5 package requiring minimum boar.

📥 Download Datasheet

Datasheet Details

Part number FP6861
Manufacturer Fiti
File Size 335.00 KB
Description Single-Channel 1.1A USB High-Side Power Switch with Flag
Datasheet download datasheet FP6861 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
FP60U120BA FAST RECOVERY DIODE JILIN SINO
FP6101 2A Buck Switching Regulator Feeling Technology
FP6102 3A Buck Switching Regulator Feeling Technology
FP6111 2A Asynchronous Buck Regulator Feeling Technology
FP6112 3A Asynchronous Buck Regulator Feeling Technology

Other Datasheets by Fiti

Part Number Description
FP6861C Single-Channel Power Distribution Switch
FP6861D Dual-Channel Power Distribution Switch
FP6861E Single-Channel Power Distribution Switch
FP6862 Dual-Channel USB High-Side Power Switch
FP6809 3-Pin Microprocessor Reset Circuits

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
fitipower integrated technology lnc. FP6861 Single-Channel 1.1A USB High-Side Power Switch with Flag Description The FP6861 is a single channel USB power switch which is optimized for the self-powered and the bus-powered Universal Serial Bus (USB) applications. It is cost-effective, low voltage and equipped single N-Channel high-side MOSFET switch. For driving the internal MOSFET switch, a charge pump circuitry is built in the FP6861. The switch's low RDS(ON), 95mΩ, meets USB voltage drop requirement, and a fault flag output is available to indicate fault conditions to the local USB controller.