FP6861D Datasheet Dual-Channel Power Distribution Switch

Manufacturer: Fiti

Overview: fitipower integrated technology lnc. FP6861D Dual-Channel Power Distribution.

FP6861D dual-channel power distribution switch by Fiti - Datasheet Preview

Datasheet Details

Part number	FP6861D
Manufacturer	Fiti
File Size	278.12 KB
Description	Dual-Channel Power Distribution Switch
Download	FP6861D Download (PDF)

General Description

The FP6861D is a cost-effective, low voltage, dual N-Channel MOSFET high-side power switch, optimized for self-powered and bus-powered Universal Serial Bus (USB) applications.

The FP6861D is equipped with a charge pump circuitry to drive the internal MOSFET switch.

The switch's low RDS(ON) meets USB voltage drop requirement, and a flag output is available to indicate fault conditions to the local USB controller.

Key Features

include soft-start to limit inrush current during plug-in, thermal shutdown to prevent catastrophic switch failure from high-current loads, and under-voltage lockout (UVLO) to ensure that the device remains off unless there is a valid input voltage present. Besides, fault current is limited to specific current for FP6861D in dual port in accordance with the USB power requirements. FP6861D will prevent reverse current when it is disabled and VOUT is higher than VIN. The FP6861D is available in SO.

More Datasheets from Fiti

Part Number	Description
FP6861	Single-Channel 1.1A USB High-Side Power Switch with Flag
FP6861C	Single-Channel Power Distribution Switch
FP6861E	Single-Channel Power Distribution Switch
FP6862	Dual-Channel USB High-Side Power Switch
FP6809	3-Pin Microprocessor Reset Circuits
FP6810	3-Pin Microprocessor Reset Circuits
FP6811	Microprocessor Voltage Monitors
FP6812	Microprocessor Voltage Monitors
FP6128	Dual Output Low-Dropout Regulator
FP6131	600mA Low Dropout Linear Regulator