Datasheet4U Logo Datasheet4U.com

FP6862 - Dual-Channel USB High-Side Power Switch

General Description

The FP6862 is dual high-side MOSFET switches with independent enable and error flag functions, optimized for general-purpose power distribution and Universal Serial Bus (USB) requiring circuit protection.

Key Features

  • 100mΩ (5V Input) On-Resistance Per Channel.
  • 2.7V to 5.5V Operating Range.
  • 1A Minimum Continuous Current Per Channel.
  • Short Circuit Protection with Thermal Shutdown.
  • Thermally Isolated Channels.
  • Under Voltage Lockout (UVLO).
  • Reverse Current Flow Blocking.
  • Soft-Start Circuit.
  • Enable Active Low or Active High.
  • RoHS Compliant.

📥 Download Datasheet

Datasheet Details

Part number FP6862
Manufacturer Fiti
File Size 650.40 KB
Description Dual-Channel USB High-Side Power Switch
Datasheet download datasheet FP6862 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
FP60U120BA FAST RECOVERY DIODE JILIN SINO
FP6101 2A Buck Switching Regulator Feeling Technology
FP6102 3A Buck Switching Regulator Feeling Technology
FP6111 2A Asynchronous Buck Regulator Feeling Technology
FP6112 3A Asynchronous Buck Regulator Feeling Technology

Other Datasheets by Fiti

Part Number Description
FP6861 Single-Channel 1.1A USB High-Side Power Switch with Flag
FP6861C Single-Channel Power Distribution Switch
FP6861D Dual-Channel Power Distribution Switch
FP6861E Single-Channel Power Distribution Switch
FP6809 3-Pin Microprocessor Reset Circuits

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
fitipower integrated technology lnc. FP6862 Dual-Channel U8S5BT High-Side Power Switch Description The FP6862 is dual high-side MOSFET switches with independent enable and error flag functions, optimized for general-purpose power distribution and Universal Serial Bus (USB) requiring circuit protection. The FP6862 supports the following USB requirements: each switch channel supplies up to 1A as required by USB downstream devices; the low onresistance switch meets the USB voltage drop requirements. Both switches employ soft-start circuit that minimizes inrush current in applications where highly capacitive loads are employed. A fault status output flag is asserted during overcurrent, thermal shutdown or UVLO conditions.