Datasheet4U Logo Datasheet4U.com

FP6861E - Single-Channel Power Distribution Switch

General Description

The FP6861E is a cost-effective, low voltage, single N-Channel MOSFET high-side power switch, optimized for self-powered and bus-powered Universal Serial Bus (USB) applications.

The FP6861E is equipped with a charge pump circuitry to drive the internal MOSFET switch.

Key Features

  • include soft-start to limit inrush current during plug-in, thermal shutdown to prevent catastrophic switch failure from high-current loads, and under-voltage lockout (UVLO) to ensure that the device remains off unless there is a valid input voltage present. Besides, fault current is limited to specific current for FP6861E in single port in accordance with the USB power requirements. FP6861E will prevent reverse current when it is disabled and VOUT is higher than VIN. The FP6861E is available in.

📥 Download Datasheet

Datasheet Details

Part number FP6861E
Manufacturer Fiti
File Size 305.43 KB
Description Single-Channel Power Distribution Switch
Datasheet download datasheet FP6861E Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
FP60U120BA FAST RECOVERY DIODE JILIN SINO
FP6101 2A Buck Switching Regulator Feeling Technology
FP6102 3A Buck Switching Regulator Feeling Technology
FP6111 2A Asynchronous Buck Regulator Feeling Technology
FP6112 3A Asynchronous Buck Regulator Feeling Technology

Other Datasheets by Fiti

Part Number Description
FP6861 Single-Channel 1.1A USB High-Side Power Switch with Flag
FP6861C Single-Channel Power Distribution Switch
FP6861D Dual-Channel Power Distribution Switch
FP6862 Dual-Channel USB High-Side Power Switch
FP6809 3-Pin Microprocessor Reset Circuits

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
fitipower integrated technology lnc. FP6861E Single-Channel Power Distribution Switch Description The FP6861E is a cost-effective, low voltage, single N-Channel MOSFET high-side power switch, optimized for self-powered and bus-powered Universal Serial Bus (USB) applications. The FP6861E is equipped with a charge pump circuitry to drive the internal MOSFET switch. The switch's low RDS(ON) meets USB voltage drop requirement, and a flag output is available to indicate fault conditions to the local USB controller. Additional features include soft-start to limit inrush current during plug-in, thermal shutdown to prevent catastrophic switch failure from high-current loads, and under-voltage lockout (UVLO) to ensure that the device remains off unless there is a valid input voltage present.