Datasheet4U Logo Datasheet4U.com

FP6861C Datasheet Single-channel Power Distribution Switch

Manufacturer: Fiti

Overview: FP6861C Single-Channel Power Distribution Switch.

Datasheet Details

Part number FP6861C
Manufacturer Fiti
File Size 601.08 KB
Description Single-Channel Power Distribution Switch
Datasheet FP6861C-Fiti.pdf

General Description

The FP6861C is a cost-effective, low voltage, single N-Channel MOSFET high-side power switch, optimized for self-powered and bus-powered Universal Serial Bus (USB) applications.

The FP6861C is equipped with a charge pump circuitry to drive the internal MOSFET switch.

The switch's low RDS(ON) meets USB voltage drop requirement, and a flag output is available to indicate fault conditions to the local USB controller.

Key Features

  • include soft-start to limit inrush current during plug-in, thermal shutdown to prevent catastrophic switch failure from high-current loads, and under-voltage lockout (UVLO) to ensure that the device remains off unless there is a valid input voltage present. Besides, fault current is limited to specific current for FP6861C in single port in accordance with the USB power requirements. FP6861C will prevent reverse current when it is disabled and VOUT is higher than VIN. The FP6861C is available in.

More Datasheets from Fiti

Part Number Description
FP6861 Single-Channel 1.1A USB High-Side Power Switch with Flag
FP6861D Dual-Channel Power Distribution Switch
FP6861E Single-Channel Power Distribution Switch
FP6862 Dual-Channel USB High-Side Power Switch
FP6809 3-Pin Microprocessor Reset Circuits
FP6810 3-Pin Microprocessor Reset Circuits
FP6811 Microprocessor Voltage Monitors
FP6812 Microprocessor Voltage Monitors
FP6128 Dual Output Low-Dropout Regulator
FP6131 600mA Low Dropout Linear Regulator

FP6861C Distributor