Document Revision History
Description of Change
Initial Public Release
Added Package Pins to GPIO Table in Part 8 General Purpose Input/Output (GPIO). Added
“Typical Min” values to Table 10-17. Editing grammar, spelling, consistency of language throughout
family. Updated values in Regulator Parameters Table 10-9; External Clock Operation Timing
Requirements Table 10-13; SPI Timing Table 10-18; ADC Parameters Table 10-24; and IO Loading
Coefficients at 10MHz Table 10-25.
Corrected Table 4-6 Data Memory Map - changed address X:$FF0000 to X:$FFFF00
Added Part 4.8, added the word “access” to FM Error Interrupt in Table 4-5, documenting only Typ.
numbers for LVI in Table 10-6, updated EMI numbers and write-up in Part 10.8.
Updated numbers in Table 10-7 and Table 10-8 with more recent data. Corrected typo in Table 10-3
in Pd characteristics.
Replace any reference to Flash Interface Unit with Flash Module; removed references to JTAG pin
DE; corrected pin number for D14 in Table 2-2; added note to VCAP pin in Table 2-2; corrected
thermal numbers for 160 LQFP in Table 10-3; removed unneccessary notes in Table 10-12; corrected
temperature range in Table 10-14; added ADC calibration information to Table 10-24 and new graphs
in Figure 10-22.
Adding/clarifing notes to Table 4-4 to help clarify independent program flash blocks and other
Program Flash modes, clarification in Table 10-23, corrected Digital Input Current Low (pull-up
enabled) numbers in Table 10-5. Removed text and Table 10-2; replaced with note to Table 10-1.
Added 56F8157 information; edited to indicate differences in 56F8357 and 56F8157. Reformatted for
Freescale look and feel. Updated Temperature Sensor and ADC tables, then updated balance of elec-
trical tables for consistency throughout the family. Clarified I/O power description in Table 2-2, added
note to Table 10-7 and clarified Section 12.3.
Please see http://www.freescale.com for the most current Data Sheet revision.
56F8357 Technical Data, Rev. 8.0
2 Freescale Semiconductor