MB90420G Overview
The instruction set retains the same AT architecture as the FUJITSU original F2MC-8L and F2MC-16L series, with further refinements including high-level language instructions, expanded addressing mode, enhanced (signed) multipler-divider putation and bit processing. In addition, A 32-bit accumulator is built in to enable long word processing.
MB90420G Key Features
- 16-bit input capture (4 channels) Detects rising, falling, or both edges. 16-bit capture register × 4 Pin input edge det
- 16-bit reload timer (2 channels) 16-bit reload timer operation (select toggle output or one-shot output) Event count fun
- Clock timer (main clock) Operates directly from oscillator clock. pensates for oscillator deviation Read/write enabled s
- 16-bit PPG (3 channels) Output pins (3) , external trigger input pin (1) Output clock frequencies : fCP, fCP/22, fCP/24,
- Delay interrupt Generates interrupt for task switching. Interruptions to CPU can be generated/deleted by software settin
- External interrupts (8 channels) 8-channel independent operation Interrupt source setting available : “L” to “H” edge/ “
- CAN interface -1 Conforms to CAN specifications version 2.0 Part A and B. Automatic resend in case of error. Automatic t
- LCD controller/driver (1 channel) Segment driver and mand driver with direct LCD panel (display) drive capability
- Low voltage/Program Looping detect reset -2 Automatic reset when low voltage is detected Program Loo