MB90480/485 Series
s FEATURES
• Clock
Minimum instruction execution time: 40.0 ns/6.25 MHz base frequency multiplied × 4 (25 MHz internal operating
frequency/3.3 V ± 0.3 V)
62.5 ns/4 MHz base frequency multiplied × 4 (16 MHz internal operating
frequency/3.0 V ± 0.3 V) PLL clock multiplier
• Maximum memory space: 16 Mbyte
• Instruction set optimized for controller applications
Supported data types (bit, byte, word, or long word)
Typical addressing modes (23 types)
Enhanced signed multiplication/division instruction and RETI instruction functions
32-bit accumulator for enhanced high-precision calculation
• Instruction set designed for high-level language (C) and multi-task operations
System stack pointer adopted
Instruction set compatibility and barrel shift instructions
• Non-multiplex bus/multiplex bus compatible
• Enhanced execution speed
4 byte instruction queue
• Enhanced interrupt functions
8 levels setting with programmable priority, 8 external interrupts
• Data transmission function (µDMA)
Up to 16 channels
• Embedded ROM
Flash versions : 192 KB, 256 KB, MASK versions : 192 KB
• Embedded RAM
Flash versions : 4 KB, 6 KB, 10 KB, MASK versions : 10 KB
• General purpose ports
Up to 84 ports
(Except MB90V480 : Includes 16 ports with input pull-up resistance, 16 ports with output open drain settings)
• A/D converter
8-channel RC sequential comparison type (10-bit resolution, 3.68 µs conversion time (at 25 MHz) )
• I2C interface (MB90485 series only) : 1channel, P76/P77 Nch OD pin (without Pch)
Do not apply high voltage in excess of recommended operating ranges
to the Nch open drain pin (with Pch) in MB90V485.
• µPG (MB90485 series only) : 1 channel
• UART: 1 channel
• I/O expanded serial interface (SIO) : 2 channels
• 8/16-bit PPG: 3 channels (with 8-bit × 6 channel/16-bit × 3 channel mode switching function)
• 8/16-bit up/down timer: 1 channel (with 8-bit × 2 channel/16-bit × 1-channel mode switching function)
• PWC (MB90485 series only) : 3 channels (Capable of compare the inputs to two of the three)
• 3 V/5 V I/F pin (MB90485 series only)
P20 to P27, P30 to P37, P40 to P47, P70 to P77
• 16-bit reload timer: 1 channel
• 16-bit I/O timer: 2-channel input capture, 6-channel output compare, 1-channel free run timer
• On chip dual clock generator system
• Low-power consumption mode
With stop mode, sleep mode, CPU intermittent operation mode, watch mode, timebase timer mode
• Packages: QFP 100/LQFP 100
• Process: CMOS technology
• Power supply voltage: 3 V, single source (some ports can be operated by 5 V power supply at MB90485 series)
2
