Datasheet4U Logo Datasheet4U.com

GS9028 - Cable Driver

General Description

The GS9028 is a second generation bipolar integrated circuit designed to drive two 75Ω co-axial cables.

Key Features

  • SMPTE 259M compliant.
  • Two complementary outputs, adjustable from 50 to 1000mVp-p into 75Ω loads.
  • Operational from DC to 622Mb/s.
  • Nominal 470ps rise and fall times.
  • < ±7% output amplitude control.
  • 45% system power reduction over the GS9008.
  • No external pulldown resistors required.
  • Input hysteresis.
  • Operational down to 80mV input amplitude.
  • Operates from a single +5 or -5 volt supply.
  • 8-pin SOIC.

📥 Download Datasheet

Datasheet Details

Part number GS9028
Manufacturer Gennum
File Size 815.55 KB
Description Cable Driver
Datasheet download datasheet GS9028 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
GS9020 2A Sink/Source Bus Termination Regulator Globaltech
GS9015 Small Signal Transistors Vishay
GS9065A HD-LINX-R II Multi-Rate SDI Automatic Reclocker Gennum Corporation
GS9068A HD-LINX-R II Multi-Rate Dual Slew-Rate Cable Driver Gennum Corporation
GS9075A HD-LINX-R II Multi-Rate SDI Automatic Reclocker Gennum Corporation

Other Datasheets by Gennum

Part Number Description
GS9020A Serial Digital Video Input Processor
GS9022 Digital Video Serializer
GS9023 Embedded Audio CODEC
GS9024 Automatic Cable Equalizer
GS9025A Serial Digital Receiver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
GS9028 GENLINX™ II Cable Driver with Two Adjustable Outputs Features • SMPTE 259M compliant • Two complementary outputs, adjustable from 50 to 1000mVp-p into 75Ω loads • Operational from DC to 622Mb/s • Nominal 470ps rise and fall times • < ±7% output amplitude control • 45% system power reduction over the GS9008 • No external pulldown resistors required • Input hysteresis • Operational down to 80mV input amplitude • Operates from a single +5 or -5 volt supply • 8-pin SOIC • Pb-free and Green Applications • 4ƒsc, 4:2:2, and 4:4:4:4 serial digital video interfaces from 143Mb/s to 540Mb/s; general purpose high-speed cable driver applications. Description The GS9028 is a second generation bipolar integrated circuit designed to drive two 75Ω co-axial cables.