GS9029 - Serial Digital Video Cable Driver

Gennum

Datasheet Details

Part number	GS9029
Manufacturer	Gennum
File Size	125.82 KB
Description	Serial Digital Video Cable Driver
Datasheet	GS9029_ETC.pdf

DATA SHEET The GS9029 is a second generation bipolar integrated circuit designed to drive four 75Ω co-axial cables.The GS9029

SMPTE 259M compliant.
four isolated outputs (two complimentary pairs), adjustable from 50mV-1000mV into 75Ω loads.
operational from 143Mb/s to 540Mb/s and beyond.
nominal 500ps rise/fall times.
precise ±7.5% output amplitudes.
40% system power reduction over GS9007.
75Ω on-chip input termination resistors.
input hysteresis.
operational down to 80mV input amplitude.
superior output isolation.
"Bus.

📁 GS9029 Similar Datasheet

GS9020 - 2A Sink/Source Bus Termination Regulator (Globaltech)
GS9020A - Serial Digital Video Input Processor (GENNUM)
GS9023 - Embedded Audio CODEC (GENNUM)
GS9025A - Serial Digital Receiver (GENNUM)
GS9015 - Small Signal Transistors (Vishay)
GS9065A - HD-LINX-R II Multi-Rate SDI Automatic Reclocker (Gennum Corporation)
GS9068A - HD-LINX-R II Multi-Rate Dual Slew-Rate Cable Driver (Gennum Corporation)
GS9075A - HD-LINX-R II Multi-Rate SDI Automatic Reclocker (Gennum Corporation)

Other Datasheets by Gennum

Published: Apr 21, 2019 |