GigaDevice GD25D10B
The GD25D10B/05B (1M/512K-bit) Serial flash supports the standard Serial Peripheral Interface (SPI), and supports the Dual Output: Serial Clock, Chip Select, Serial Data I/O0 (SI), O1 (SO). The Dual Output data is transferred with speed of 160Mbits/s.| Part No. | GD25D10B |
|---|---|
| Datasheet | GD25D10B Download |
| Manufacturer |  GigaDevice |
| Description | Uniform Sector Standard and Dual Serial Flash |
| Buy | Stock & Price |
FEATURES
GD25D10B/05B● 1M/512K-bit Serial Flash -128K/64K-byte -256 bytes per programmable page
● Standard, Dual Output -Standard SPI: SCLK, CS#, SI, SO, WP# -Dual Output: SCLK, CS#, IO0, O1, WP#
● Clock Frequency -80MHz for fast read with 30PF load -Dual Output Data transfer up to 160Mbits/s
● Software/Hardware Write Protection -Write protect all/portion of memory via software -Enable/Disable protection with WP# Pin
● Cycling endurance -Minimum 100,000 Program/Erase Cycles
● Data retention -20-year data retention typical
● Program/Erase Speed -Page Program time: 0.7ms typical -Sector Erase time: 40ms typical -Block Erase time: 0.2/0.4s typical -Chip Erase time:0.8/0.4s typical
● Flexible Architecture -Sector of 4K-byte -Block of 32/64k-byte
● Low Power Consumption -18mA maximum active current -5uA maximum power down current
● Single Power Supply Voltage -Full voltage range:2.7~3.6V
● Package option -SOP8 150MIL -TSSOP8 173MIL -USON8 2x3mm 3 Uniform Sector Standard and Dual Serial Flash 2.
