RFM64B Datasheet | HOPERF

Description The RFM64B is a low cost transceiver module operating in the 433MHz frequency bands. The RFM64B is optimized for very low power consumption (3m A in receiver mode). It incorporates a baseband modem with data rates up to 150 kb/s. Data handling features include a sixty-four byte FIFO, packet handling, automatic CRC generation and data whitening. All major RF munication parameters are programmable and most of them may be dynamically set. It plies with European (ETSI EN 300-220 V2.1.1) and North American(FCC part15.247 and 15.249) regulatory standards. （Note：RFM64B for No SAW filter module， Application transmit function can't meet the FCC/CE standard requirements） V1.1 In order to better use RFM64B modules, this specification also involves a large number of the parameters and functions of its core chip RF64's, including those IC pins which are not leaded out. All of these can help customers gain a better understanding of the performance of RFM64B modules, and enhance the application skills. Applications - - - - - - - Wireless alarm and security systems Wireless sensor networks Automated Meter Reading Home and building automation Industrial monitoring and control Remote Wireless Control Active RFID PHY Features - Low Rx power consumption: 3m A - Low Tx power consumption: 25 m A @ +10 d Bm - Good reception sensitivity: down to -104 d Bm at 25 kb/s in FSK, -110 d Bm at 2kb/s in OOK - Programmable RF output power: up to +12 d Bm in 8 steps - Packet handling feature with data whitening and automatic CRC generation - RSSI (Received Signal Strength Indicator) - Bit rates up to 150 kb/s, NRZ coding - On-module frequency synthesizer - FSK and OOK modulation - Ining sync word recognition - Built-in Bit-Synchronizer for ining data and clock synchronization and recovery - Module size:19.7X16mm - Optimized Circuit Configuration for Low-cost applications Page 1 of 75 Tel: +86-755-82973805 Fax: +86-755-82973550 E-mail: sales@hoperf. http://.hoperf. Free Datasheet...