900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf






HP

HCPL-0731 Datasheet Preview

HCPL-0731 Datasheet

High Gain Optocouplers

No Preview Available !

Dual Channel Low Input
Current, High Gain
Optocouplers
Technical Data
H
HCPL-2730 HCPL-0730
HCPL-2731 HCPL-0731
Features
• High Current Transfer Ratio
– 1800% Typical
• Low Input Current
Requirements – 0.5 mA
• Low Output Saturation
Voltage – 0.1 V
• High Density Packaging
• Performance Guaranteed
over Temperature
0°C to 70°C
• LSTTL Compatible
• High Output Current –
60 mA
• Safety Approval
UL Recognized - 2500 V rms
for 1 Minute and
5000 V rms* for 1 minute
CSA Approved
• Available in 8 Pin DIP and
SO-8 Footprint
• MIL-STD-1772 Version
Available (HCPL-5730/5731)
• Surface Mount Gull Wing
Option Available for 8-Pin
DIP (Option 300)
Applications
• Digital Logic Ground
Isolation
• Telephone Ring Detector
• Level Shifting
• EIA RS-232C Line Receiver
• Polarity Sensing
• Low Input Current Line
Receiver - Long Line or Party
Line
• Microprocessor Bus
Isolation
• Current Loop Receiver
• Line Voltage Status Indicator
-Low Input Power
Dissipation
Description
These dual channel optocouplers
contain a separated pair of GaAsP
light emitting diodes optically
coupled to a pair of integrated
high gain photo detectors. They
provide extremely high current
transfer ratio and excellent input-
output common mode transient
immunity. A separate pin for the
photodiodes and first gain stages
(VCC) permits lower output satura-
tion voltage and higher speed
operation than possible with
conventional photodarlington
type optocouplers. In addition,
VCC may be as low as 1.6 V
Functional Diagram
ANODE 1 1
CATHODE 1 2
CATHODE 2 3
ANODE 2 4
8 VCC
7 VO1
6 VO2
5 GND
TRUTH TABLE
LED
VO
ON LOW
OFF HIGH
*5000 V rms/1 minute withstand voltage rating is for Option 020 (HCPL-2730, HCLP-2731) products only.
A 0.1 µF bypass capacitor connected between pins 5 and 8 is recommended.
CAUTION: It is advised that normal static precautions be taken in handling and assembly of this component to
prevent damage and/or degradation which may be induced by ESD.
1-108
5965-3597E




HP

HCPL-0731 Datasheet Preview

HCPL-0731 Datasheet

High Gain Optocouplers

No Preview Available !

without adversely affecting the
parametric performance.
These dual channel optocouplers
are available in an 8-Pin DIP and
in an industry standard SO-8
package. The following is a cross
reference table listing the 8-Pin
DIP part number and the
electrically equivalent SOIC-8 part
number.
8-Pin DIP SO-8
HCPL-2730 HCPL-0730
HCPL-2731 HCPL-0731
The SO-8 does not require
“through holes” in a PCB. This
package occupies approximately
one-third the footprint area of the
standard dual-in-line package.
The lead profile is designed to be
compatible with standard surface
mount processes.
Guaranteed operation at low input
currents and the high current
transfer ratio (CTR) reduce the
magnitude and effects of CTR
degradation.
The outstanding high temperature
performance of this split
Darlington type output amplifier
results from the inclusion of an
integrated emitter-base bypass
resistor which shunts photodiode
and first stage leakage currents to
ground.
The HCPL-2731/0731 have a
400% minimum CTR at an input
current of only 0.5 mA making it
ideal for use in low input current
applications such as MOS, CMOS,
and low power logic interfacing or
RS232C data transmission
systems. In addition, the high
CTR and high output current
capability make this device
extremely useful in applications
where a high fanout is required.
Compatibility with high voltage
CMOS logic systems is guaranteed
by the 18 V VCC and VO specifica-
tions and by testing output high
leakage (IOH) at 18 V.
The HCPL-2730/0730 are speci-
fied at an input current of 1.6 mA
and have a 7 V VCC and VO rating.
The 300% minimum CTR allows
TTL to TTL interfacing at this
input current.
Important specifications such as
CTR, leakage current, and output
saturation voltage are guaranteed
over the 0°C to 70°C temperature
range to allow trouble-free system
operation. Selection for lower
input currents down to 250 µA is
available upon request.
Selection Guide
8-Pin DIP
(300 Mil)
Dual
Single
Channel
Channel Package
Package
HCPL-
6N139[1]
2731
6N138[1]
2730
HCPL-4701[1] 4731[1]
Small Outline SO-8
Single
Dual
Channel Channel
Package Package
HCPL- HCPL-
Widebody
Package
(400 mil)
Single
Channel
Package
0701[1]
0731 HCNW139[1]
Minimum
Input ON
Current
(IF)
0.5 mA
0700[1]
0730 HCNW138[1] 1.6 mA
070A[1] 073A[1]
40 µA
0.5 mA
Minimum
CTR
400%
Absolute
Maxi-
mum
VCC
18 V
300%
7V
800%
18 V
300%
20 V
Hermetic
Single and
Dual
Channel
Packages
HCPL-
5701[1]
5700[1]
5731[1]
5730[1]
Note:
1. Technical data are on separate HP publications.
1-109


Part Number HCPL-0731
Description High Gain Optocouplers
Maker HP
Total Page 12 Pages
PDF Download

HCPL-0731 Datasheet PDF

View PDF for Mobile








Similar Datasheet

1 HCPL-0730 LOW INPUT CURRENT HIGH GAIN SPLIT DARLINGTON OPTOCOUPLERS
Fairchild Semiconductor
2 HCPL-0730 High Gain Optocouplers
Avago
3 HCPL-0730 High Gain Optocouplers
HP
4 HCPL-0731 LOW INPUT CURRENT HIGH GAIN SPLIT DARLINGTON OPTOCOUPLERS
Fairchild Semiconductor
5 HCPL-0731 High Gain Optocouplers
Avago
6 HCPL-0731 High Gain Optocouplers
HP
7 HCPL-0738 High Speed CMOS Optocoupler
Agilent
8 HCPL-0738 High SpeedCMOS Optocoupler
Avago
9 HCPL-073A Very Low Power Consumption High Gain Optocouplers
Avago





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy