Datasheet4U Logo Datasheet4U.com

HD74ALVCH162831 - 1-bit 4-bit Address Register / Driver with 3-state Outputs

Description

This 1-bit to 4-bit address register / driver is designed for 2.3 V to 3.6 V VCC operation.

The device is ideal for use in applications in which a single address bus is driving four separate memory locations.

Features

  • VCC = 2.3 V to 3.6 V.
  • Typical VOL ground bounce < 0.8 V (@VCC = 3.3 V, Ta = 25°C).
  • Typical VOH undershoot > 2.0 V (@VCC = 3.3 V, Ta = 25°C).
  • High output current ±12 mA (@VCC = 3.0 V).
  • Bus hold on data inputs eliminates the need for external pullup / pulldown resistors.
  • All outputs have equivalent 26 Ω series resistors, so no external resistors are required. HD74ALVCH162831 Function Table Inputs OE H L L L L SEL X H H L L CLK X X X ↑ ↑ A X.

📥 Download Datasheet

Datasheet preview – HD74ALVCH162831

Datasheet Details

Part number HD74ALVCH162831
Manufacturer Hitachi Semiconductor
File Size 61.54 KB
Description 1-bit 4-bit Address Register / Driver with 3-state Outputs
Datasheet download datasheet HD74ALVCH162831 Datasheet
Additional preview pages of the HD74ALVCH162831 datasheet.
Other Datasheets by Hitachi Semiconductor

Full PDF Text Transcription

Click to expand full text
HD74ALVCH162831 1-bit 4-bit Address Register / Driver with 3-state Outputs ADE-205-195 (Z) Preliminary 1st. Edition March 1998 Description This 1-bit to 4-bit address register / driver is designed for 2.3 V to 3.6 V VCC operation. The device is ideal for use in applications in which a single address bus is driving four separate memory locations. The HD74ALVCH162831 can be used as a buffer or a register, depending on the logic level of the select (SEL) input. When SEL is logic high, the device is in the buffer mode. The outputs follow the inputs and are controlled by the two output enable (OE) controls. Each OE controls two groups of nine outputs. When SEL is logic low, the device is in the register mode. The register is an edge triggered D-type flip flop.
Published: |