Datasheet4U Logo Datasheet4U.com

HD74LV240A - Octal Buffers / Drivers with 3-state Outputs

Description

The HD74V240A has eight inverter drivers with three-state outputs in a 20-pin package.

Four inverters are included in one circuit.

Each circuit can be independently controlled by the enable signal 1OE or 2OE, which enables outputs when receiving a low-level signal.

Features

  • VCC = 2.0 V to 5.5 V operation All inputs VIH (Max. ) = 5.5 V (@VCC = 0 V to 5.5 V) All outputs VO (Max. ) = 5.5 V (@VCC = 0 V) Typical VOL ground bounce < 0.8 V (@VCC = 3.3 V, Ta = 25°C) Typical VOH undershoot > 2.3 V (@VCC = 3.3 V, Ta = 25°C) Output current ±8 mA (@VCC = 3.0 V to 3.6 V), ±16 mA (@VCC = 4.5 V to 5.5 V) Function Table Inputs OE L L H Note: H: L: X: Z: High level Low level Immaterial High impedance A H L X Output Y L H Z.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
HD74LV240A Octal Buffers / Drivers Renesas
HD74LV244A Octal Buffers / Drivers Renesas
HD74LV245A Octal Bus Transceivers Renesas
HD74LV20A Dual 4-input Positive NAND Gates Renesas
HD74LV21A Dual 4-input Positive AND Gates Renesas

Other Datasheets by Hitachi Semiconductor (now Renesas)

Part Number Description
HD74LV244A Octal Buffers / Drivers with 3-state Outputs
HD74LV245A Octal Bus Transceivers with 3-state Outputs
HD74LV20A Dual 4-input Positive NAND Gates
HD74LV21A Dual 4-input Positive AND Gates
HD74LV221A Dual Monostable Multivibrators

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
HD74LV240A Octal Buffers / Drivers with 3-state Outputs ADE-205-272 (Z) 1st Edition April 1999 Description The HD74V240A has eight inverter drivers with three-state outputs in a 20-pin package. Four inverters are included in one circuit. Each circuit can be independently controlled by the enable signal 1OE or 2OE, which enables outputs when receiving a low-level signal. Low-voltage operation is suitable for batterypowered products (e.g., notebook computers), and the low-power consumption extends the battery life. Features • • • • • • VCC = 2.0 V to 5.5 V operation All inputs VIH (Max.) = 5.5 V (@VCC = 0 V to 5.5 V) All outputs VO (Max.) = 5.5 V (@VCC = 0 V) Typical VOL ground bounce < 0.8 V (@VCC = 3.3 V, Ta = 25°C) Typical VOH undershoot > 2.3 V (@VCC = 3.
Published: |