900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf






IK Semiconductor

IN74AC175 Datasheet Preview

IN74AC175 Datasheet

Quad D-Type Flip-Flop

No Preview Available !

TECHNICAL DATA
Quad D Flip-Flop with
Common Clock and Reset
High-Speed Silicon-Gate CMOS
IN74AC175
The IN74AC175 is identical in pinout to the LS/ALS175,
HC/HCT175. The device inputs are compatible with standard CMOS
outputs; with pullup resistors, they are compatible with LS/ALS outputs.
This device consists of four D flip-flops with common Reset and
Clock inputs, and separate D inputs. Reset (active-low) is asynchronous
and occurs when a low level is applied to the Reset input. Information at a
D input is transferred to the corresponding Q output on the next positive-
going edge of the Clock input.
Outputs Directly Interface to CMOS, NMOS, and TTL
Operating Voltage Range: 2.0 to 6.0 V
Low Input Current: 1.0 µA; 0.1 µA @ 25°C
High Noise Immunity Characteristic of CMOS Devices
Outputs Source/Sink 24 mA
ORDERING INFORMATION
IN74AC175N Plastic
IN74AC175D SOIC
TA = -40° to 85° C for all packages
PIN ASSIGNMENT
LOGIC DIAGRAM
PIN 16=VCC
PIN 8 = GND
www.datasheet4u.com
FUNCTION TABLE
Inputs
Outputs
Reset Clock D Q Q
L X X LH
H H HL
H L LH
H L X no change
X = Don’t care
1




IK Semiconductor

IN74AC175 Datasheet Preview

IN74AC175 Datasheet

Quad D-Type Flip-Flop

No Preview Available !

IN74AC175
MAXIMUM RATINGS*
Symbol
Parameter
Value
VCC
VIN
VOUT
IIN
IOUT
ICC
PD
DC Supply Voltage (Referenced to GND)
DC Input Voltage (Referenced to GND)
DC Output Voltage (Referenced to GND)
DC Input Current, per Pin
DC Output Sink/Source Current, per Pin
DC Supply Current, VCC and GND Pins
Power Dissipation in Still Air, Plastic DIP+
SOIC Package+
-0.5 to +7.0
-0.5 to VCC +0.5
-0.5 to VCC +0.5
±20
±50
±50
750
500
Tstg Storage Temperature
-65 to +150
TL Lead Temperature, 1 mm from Case for 10 Seconds
(Plastic DIP or SOIC Package)
260
*Maximum Ratings are those values beyond which damage to the device may occur.
Functional operation should be restricted to the Recommended Operating Conditions.
+Derating - Plastic DIP: - 10 mW/°C from 65° to 125°C
SOIC Package: : - 7 mW/°C from 65° to 125°C
Unit
V
V
V
mA
mA
mA
mW
°C
°C
RECOMMENDED OPERATING CONDITIONS
Symbol
Parameter
VCC
VIN, VOUT
DC Supply Voltage (Referenced to GND)
DC Input Voltage, Output Voltage (Referenced to GND)
TJ Junction Temperature (PDIP)
TA Operating Temperature, All Package Types
IOH Output Current - High
IOL Output Current - Low
tr, tf Input Rise and Fall Time *
(except Schmitt Inputs)
* VIN from 30% to 70% VCC
VCC =3.0 V
VCC =4.5 V
VCC =5.5 V
Min Max Unit
2.0 6.0
V
0 VCC V
140 °C
-40 +85 °C
-24 mA
24 mA
0 150 ns/V
0 40
0 25
This device contains protection circuitry to guard against damage due to high static voltages or electric fields.
However, precautions must be taken to avoid applications of any voltage higher than maximum rated voltages to this
high-impedance circuit. For proper operation, VIN and VOUT should be constrained to the range GND(VIN or
VOUT)VCC.
Unused inputs must always be tied to an appropriate logic voltage level (e.g., either GND or VCC). Unused
outputs must be left open.
2


Part Number IN74AC175
Description Quad D-Type Flip-Flop
Maker IK Semiconductor
Total Page 6 Pages
PDF Download

IN74AC175 Datasheet PDF

View PDF for Mobile








Similar Datasheet

1 IN74AC174 Hex D-Type Flip-Flop
IK Semiconductor
2 IN74AC175 Quad D-Type Flip-Flop
IK Semiconductor





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy