datasheet4u.com

900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf





IK Semiconductor
IK Semiconductor

IN74HC158A Datasheet Preview

IN74HC158A Datasheet

Quad 2-1 Data Selector/Multiplexer

No Preview Available !

IN74HC158A pdf
TECHNICAL DATA
Quad 2-Input Data Selectors/Multiplexers
High-Performance Silicon-Gate CMOS
IN74HC158A
The IN74HC158A is identical in pinout to the LS/ALS158. The
device inputs are compatible with standard CMOS outputs; with pullup
resistors, they are compatible with LS/ALSTTL outputs.
This device routes 2 nibbles (A or B) to a single port (Y) as
determined by the Select input. The data is presented at the outputs in
invertered form. A high level on the Output Enable input sets all four Y
outputs to a high level.
Outputs Directly Interface to CMOS, NMOS, and TTL
Operating Voltage Range: 2.0 to 6.0 V
Low Input Current: 1.0 µA
High Noise Immunity Characteristic of CMOS Devices
ORDERING INFORMATION
IN74HC158AN Plastic
IN74HC158AD SOIC
TA = -55° to 125° C for all packages
LOGIC DIAGRAM
PIN ASSIGNMENT
PIN 16 =VCC
www.datasheet4u.PcINo8m= GND
FUNCTION TABLE
Inputs
Outputs
Output
Enable
Select Y0-Y3
H XH
L L A0-A3
L H B0-B3
X=don’t care
A0-A3,B0-B3=the levels of the respective
Data-Word Inputs
1



IK Semiconductor
IK Semiconductor

IN74HC158A Datasheet Preview

IN74HC158A Datasheet

Quad 2-1 Data Selector/Multiplexer

No Preview Available !

IN74HC158A pdf
IN74HC158A
MAXIMUM RATINGS*
Symbol
Parameter
Value
VCC
VIN
VOUT
IIN
IOUT
ICC
PD
DC Supply Voltage (Referenced to GND)
DC Input Voltage (Referenced to GND)
DC Output Voltage (Referenced to GND)
DC Input Current, per Pin
DC Output Current, per Pin
DC Supply Current, VCC and GND Pins
Power Dissipation in Still Air, Plastic DIP+
SOIC Package+
-0.5 to +7.0
-1.5 to VCC +1.5
-0.5 to VCC +0.5
±20
±25
±50
750
500
Tstg Storage Temperature
-65 to +150
TL Lead Temperature, 1 mm from Case for 10 Seconds
(Plastic DIP or SOIC Package)
260
*Maximum Ratings are those values beyond which damage to the device may occur.
Functional operation should be restricted to the Recommended Operating Conditions.
+Derating - Plastic DIP: - 10 mW/°C from 65° to 125°C
SOIC Package: : - 7 mW/°C from 65° to 125°C
Unit
V
V
V
mA
mA
mA
mW
°C
°C
RECOMMENDED OPERATING CONDITIONS
Symbol
Parameter
VCC
VIN, VOUT
DC Supply Voltage (Referenced to GND)
DC Input Voltage, Output Voltage (Referenced to GND)
TA Operating Temperature, All Package Types
tr, tf Input Rise and Fall Time (Figure 1)
VCC =2.0 V
VCC =4.5 V
VCC =6.0 V
Min Max Unit
2.0 6.0
V
0 VCC V
-55 +125
°C
0 1000 ns
0 500
0 400
This device contains protection circuitry to guard against damage due to high static voltages or electric fields.
However, precautions must be taken to avoid applications of any voltage higher than maximum rated voltages to this
high-impedance circuit. For proper operation, VIN and VOUT should be constrained to the range GND(VIN or
VOUT)VCC.
Unused inputs must always be tied to an appropriate logic voltage level (e.g., either GND or VCC). Unused
outputs must be left open.
2


Part Number IN74HC158A
Description Quad 2-1 Data Selector/Multiplexer
Maker IK Semiconductor
Total Page 6 Pages
PDF Download
IN74HC158A pdf
IN74HC158A Datasheet PDF
[partsNo] view html
View PDF for Mobile








Similar Datasheet

1 IN74HC158A Quad 2-1 Data Selector/Multiplexer IK Semiconductor
IK Semiconductor
IN74HC158A pdf





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy