BGSA400ML10 Datasheet | Infineon

Features - Low RON resistance of 2.0 Ω at each port in ON state - Low COFF capacitance of 165 f F at each port in OFF state - High RF operating peak voltage handling of typical 90 V in OFF state - Low harmonic generation - MIPI RFFE 2.1 control interface - Extremely low current consumption of 22 µA - 4 default USID addresses via external USID_SEL pin - Small form factor 1.1 mm x 1.5 mm (MSL1, 260 °C per JEDEC J-STD-020) Potential applications - Impedance, antenna and inductance tuning - Tunable filters Product validation Qualified for industrial applications according to the relevant tests of JEDEC47/20/22. Description The BGSA400ML10 is a versatile shunt to ground 4xsingle-pole single-throw (4x SPST) RF antenna tuning switch. It is optimized for low COFF as well as low RON enabling applications up to 7.125 GHz. The BGSA400ML10 is ideal for antenna tuning application. This chip integrates on-chip CMOS logic and power supply regulation. Its digital control interface is pliant with MIPI2.1 RFFE specification and each switch throw can be programmed individually or all together in the same RFFE mand frame. Up to 4 instantiations of the same device can be controlled using the same RFFE bus thanks to its 4 states USID_SEL pin unique feature . Block diagram VIO SDATA SCLK USID_SEL RF1 RF2 RF3 RF4 Voltage regulator MIPI RFFE Drivers Chargepump Type BGSA400ML10 Marking 4T Package TSLP-10-3 Ordering information BGSA 400ML10 E6327 .infineon. Please read the sections "Important notice" and "Warnings" at the end of this document Revision 2.1 2022-01-31 RESTRICTED Ultra high RF voltage antenna tuning switch Table of contents Table of contents 1 Maximum ratings 2 DC characteristics...