Datasheet4U Logo Datasheet4U.com

CYPD2803 Datasheet Cmg2 Usb Type-c Emca Controller

Manufacturer: Infineon

Overview: CYPD2803 EZ-PD™ CMG2 USB Type-C EMCA controller General.

General Description

EZ-PD™ CMG2 is a dedicated USB Type-C EMCA controller that complies with the USB Type-C and Power Delivery (PD) standards for electronically marked Type-C thunderbolt and non-thunderbolt passive cable applications.

EZ-PD™ CMG2 integrates a complete Type-C transceiver and VBUS short circuit protection on both VCONN and iCnCclpuidnisn.gEtZh-ePDRA™tCerMmGi2naatlisoonirnecsliusdtoerss on the VCONN pins 47 bytes of storage for configuration of vendor, device, and cable specific configuration data.

EZ-PD™ CMG2 is targeted for passive EMCA implementations with either one or two e-marker chips on the cable.

Key Features

  • Type-C support and USB-PD support - Supports USB Power Delivery specification revision 3.1, v1.4 and USB Type-C Specification revision 2.1 (including support for the revised minimum VCONN operating voltage of 3 V) - Supports USB4, TBT4 and extended power range (EPR) PD protocol - Integrated high-voltage protection on CC, VCONN1, and VCONN2 pins to protect against accidental shorts to the VBUS pin on the Type-C connector up to 54 V - 47-byte storage programmable over Type-C interface f.

CYPD2803 Distributor