900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf






Intel

GT28F128W30 Datasheet Preview

GT28F128W30 Datasheet

Wireless Flash Memory

No Preview Available !

Intel® Wireless Flash Memory (W30)
28F640W30, 28F320W30, 28F128W30
Datasheet
Product Features
High Performance Read-While-Write/Erase
— Burst Frequency at 40 MHz
— 70 ns Initial Access Speed
— 25 ns Page-Mode Read Speed
— 20 ns Burst-Mode Read Speed
— Burst and Page Mode in All Blocks and
across All Partition Boundaries
— Burst Suspend Feature
— Enhanced Factory Programming:
3.5 µs per Word Program Time
— Programmable WAIT Signal Polarity
Flash Power
— VCC = 1.70 V – 1.90 V
— VCCQ = 2.20 V – 3.30 V
— Standby Current (0.13 µm) = 8 µA (typ.)
— Read Current = 7 mA
(4 word burst, typ.)
Flash Software
— 5 µs/9 µs (typ.) Program/Erase Suspend
Latency Time
— Intel® Flash Data Integrator (FDI) and
Common Flash Interface (CFI) Compatible
Quality and Reliability
— Operating Temperature:
–40 °C to +85 °C
— 100K Minimum Erase Cycles
— 0.13 µm ETOX™ VIII Process
— 0.18 µm ETOX™ VII Process
Flash Architecture
— Multiple 4-Mbit Partitions
— Dual Operation: RWW or RWE
— Parameter Block Size = 4-Kword
— Main block size = 32-Kword
— Top and Bottom Parameter Devices
Flash Security
— 128-bit Protection Register: 64 Unique Device
Identifier Bits; 64 User OTP Protection
Register Bits
— Absolute Write Protection with VPP at Ground
— Program and Erase Lockout during Power
Transitions
— Individual and Instantaneous Block Locking/
Unlocking with Lock-Down
Density and Packaging
— 0.13 µm: 32-, 64-, and 128-Mbit in VF BGA
Package; 64-, 128-Mbit in QUAD+ Package
— 0.18 µm: 32- and 128-Mbit Densities in VF
BGA Package; 64-Mbit Density in µBGA*
Package
— 56 Active Ball Matrix, 0.75 mm Ball-Pitch
— 16-bit Data Bus
The Intel®Wireless Flash Memory (W30) device combines state-of-the-art Intel® Flash
technology to provide the most versatile memory solution for high performance, low power,
board constraint memory applications. The W30 device offers a multi-partition, dual-operation
flash architecture that enables the device to read from one partition while programming or
erasing in another partition. This Read-While-Write or Read-While-Erase capability makes it
possible to achieve higher data throughput rates as compared to single partition devices,
allowing two processors to interleave code execution because program and erase operations can
now occur as background processes.
The W30 device incorporates a new Enhanced Factory Programming (EFP) mode to improve 12
V factory programming performance. This new feature helps eliminate manufacturing
bottlenecks associated with programming high density flash devices. Compare the EFP program
time of 3.5 µs per word to the standard factory program time of 8.0 µs per word and save
significant factory programming time for improved factory efficiency.
Additionally, the W30 device includes block lock-down and programmable WAIT signal
polarity, and is supported by an array of software tools. All these features make this product a
perfect solution for any demanding memory application.
Notice: This document contains information on new products in production. The specifications
are subject to change without notice. Verify with your local Intel sales office that you have the lat-
est datasheet before finalizing a design.
290702-010
May 2004




Intel

GT28F128W30 Datasheet Preview

GT28F128W30 Datasheet

Wireless Flash Memory

No Preview Available !

INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH INTEL® PRODUCTS. NO LICENSE, EXPRESS OR IMPLIED, BY
ESTOPPEL OR OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS IS GRANTED BY THIS DOCUMENT. EXCEPT AS PROVIDED IN
INTEL'S TERMS AND CONDITIONS OF SALE FOR SUCH PRODUCTS, INTEL ASSUMES NO LIABILITY WHATSOEVER, AND INTEL DISCLAIMS
ANY EXPRESS OR IMPLIED WARRANTY, RELATING TO SALE AND/OR USE OF INTEL PRODUCTS INCLUDING LIABILITY OR WARRANTIES
RELATING TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER
INTELLECTUAL PROPERTY RIGHT. Intel products are not intended for use in medical, life saving, or life sustaining applications.
Intel may make changes to specifications and product descriptions at any time, without notice.
Designers must not rely on the absence or characteristics of any features or instructions marked "reserved" or "undefined." Intel reserves these for
future definition and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future changes to them.
The Intel® Wireless Flash Memory (W30) may contain design defects or errors known as errata which may cause the product to deviate from
published specifications. Current characterized errata are available on request.
Contact your local Intel sales office or your distributor to obtain the latest specifications and before placing your product order.
Copies of documents which have an ordering number and are referenced in this document, or other Intel literature may be obtained by calling 1-800-
548-4725 or by visiting Intel's website at http://www.intel.com.
Copyright © 2004, Intel Corporation.
*Other names and brands may be claimed as the property of others.
Datasheet
2


Part Number GT28F128W30
Description Wireless Flash Memory
Maker Intel
Total Page 30 Pages
PDF Download

GT28F128W30 Datasheet PDF

View PDF for Mobile








Similar Datasheet

1 GT28F128W30 Wireless Flash Memory
Intel





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy