AMR2812D Datasheet | International Rectifier

Description The AMR28XXD Series of DC-DC converter modules has been specifically designed for operation in moderate radiation environments supplementing the higher radiation performance available in the International Rectifier ART2815T converter series. Environments presented to space vehicles operating in low earth orbits, launch boosters, orbiting space stations and similar applications requiring a low power, high performance converter with moderate radiation hardness performance will be optimally served by the AMR28XXD series. The physical configuration of the AMR28XXD Series permits mounting directly to a heat conduction surface without the necessity of signal leads penetrating the heat sink surface. This package configuration permits greater independence in mounting and more mechanical security than traditional packages. International Rectifier’s rugged ceramic seal pins are used exclusively in the package thereby assuring long term hermetically The AMR28XXD has been designed for high density using chip and wire hybrid technology that plies with class H requirement of MIL-PRF-38534. Manufactured in a facility fully qualified to MIL-PRF-38534, these converters are fabricated utilizing DLA Land and Maritime qualified processes. For available screening options, refer to device screening table in the data sheet. Applicable generic lot qualification test data including radiation performance can be made available on request. Variations to the standard screening can be acmodated. Consult IR Hi Rel San Jose for special requirements.   AMR Features -  30 Watts Output Power -  Available in ± 5, ±12 and ±15 Volt Outputs -  16- 40 VDC Input Range (28 VDC Nominal) -  Total Ionizing Dose > 25 k Rads(Si) -  SEE Hardened to LET up to 60 Me Vcm2/mg -  -55°C to +125°C Operating Range -  Indefinite Short Circuit Protection -  External Synchronization -  Shutdown from External Signal -  Flexible Mounting -  Fully Isolated - Input to Output and to Case -  plimentary EMI Filter...