Datasheet4U Logo Datasheet4U.com

IR25603PBF - Self-Oscillating Half-Bridge Driver

General Description

The IR25603(S) incorporates a high voltage half-bridge gate driver with a front end oscillator similar to the industry standard CMOS 555 timer.

A shutdown feature has been designed into the CT pin, so that both gate driver outputs can be disabled using a low voltage control signal.

Key Features

  • Self-Oscillating Half-Bridge Driver Product Summary.
  • Floating channel designed for bootstrap operation.
  • Integrated 600 V half-bridge gate driver.
  • 15.6 V zener clamp on Vcc.
  • True micropower start up.
  • Tighter initial dead time control.
  • Low temperature coefficient dead time.
  • Shutdown feature (1/6th Vcc) on CT pin.
  • Increased undervoltage lockout Hysteresis (1 V).
  • Lower power level-shifting circuit.
  • Constant LO, HO pulse widths at startup.
  • Lowe.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
IR25-21C-TR8 Reverse Package Infrared LED Everlight Electronics
IR2510 Epoxy Conformal Coated Uniform Roll Coated Vishay Intertechnology
IR25TT Infrared Dual Gas Sensor SGX
IR204 3mm Infrared LED Everlight Electronics
IR204-A 3mm Infrared LED Everlight Electronics

Other Datasheets by International Rectifier (now Infineon)

Part Number Description
IR25603SPBF Self-Oscillating Half-Bridge Driver
IR25600PBF Dual Low Side Driver
IR25600SPBF Dual Low Side Driver
IR25601SPBF Half-Bridge Driver
IR25602SPBF Half-Bridge Driver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
IR25603(S)PBF Features Self-Oscillating Half-Bridge Driver Product Summary  Floating channel designed for bootstrap operation  Integrated 600 V half-bridge gate driver  15.6 V zener clamp on Vcc  True micropower start up  Tighter initial dead time control  Low temperature coefficient dead time  Shutdown feature (1/6th Vcc) on CT pin  Increased undervoltage lockout Hysteresis (1 V)  Lower power level-shifting circuit  Constant LO, HO pulse widths at startup  Lower di/dt gate driver for better noise immunity  Low side output in phase with RT  Excellent latch immunity on all inputs and outputs  ESD protection on all leads VOFFSET Duty Cycle Tr / Tf VCLAMP Dead time (typ.) Io+/Io- (typ.) 600 V max. 50% 80 ns / 40 ns 15.6 V 1.