Datasheet4U Logo Datasheet4U.com

IR3313S - PROGRAMMABLE CURRENT SENSE HIGH SIDE SWITCH

Description

The IR3313S is a fully protected 4 terminals high side switch.

The input signal is referenced to Vcc.

When the input voltage Vcc - Vin is higher than the specified threshold, the output power Mosfet is turned on.

Features

  • Load current feedback Programmable over current shutdown Active clamp ESD protection Input referenced to Vcc Over temperature shutdown Reverse battery protection Product Summary Rds(on) 7 mΩ max. Vcc op. 6 to 32V Current Ratio 8800 Prog. Ishutdown 10 to 90A Vclamp 40V Packages.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
IR3300 SERVICE HANDBOOK Canon
iR3300 Copying Guide Canon
IR333 Infrared Emitting Diodes Everlight Electronics
IR333-A 5mm Infrared LED Everlight Electronics
IR333C-6-A 5mm Infrared LED Everlight Electronics

Other Datasheets by International Rectifier (now Infineon)

Part Number Description
IR3313PBF PROGRAMMABLE CURRENT SENSE HIGH SIDE SWITCH
IR3310 PROGRAMMABLE CURRENT SENSING HIGH SIDE SWITCH
IR3312 PROGRAMMABLE CURRENT SENSING HIGH SIDE SWITCH
IR3314PBF Programmable Current Sense High Side Switch
IR3314SPBF Programmable Current Sense High Side Switch

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet4U.com Data Sheet No. PD60288 IR3313S PROGRAMMABLE CURRENT SENSE HIGH SIDE SWITCH Features • • • • • • • Load current feedback Programmable over current shutdown Active clamp ESD protection Input referenced to Vcc Over temperature shutdown Reverse battery protection Product Summary Rds(on) 7 mΩ max. Vcc op. 6 to 32V Current Ratio 8800 Prog. Ishutdown 10 to 90A Vclamp 40V Packages Description The IR3313S is a fully protected 4 terminals high side switch. The input signal is referenced to Vcc. When the input voltage Vcc - Vin is higher than the specified threshold, the output power Mosfet is turned on. When the Vcc - Vin is lower than the specified Vil threshold, the output Mosfet is turned off. A current proportional to the power Mosfet current is sourced to the Ifb pin.
Published: |