IS-1825BSEH - High-Speed Dual Output PWMs

Product Overview

Intersil

Part number	IS-1825BSEH
Manufacturer	Intersil
File Size	631.26 KB
Description	High-Speed Dual Output PWMs
Datasheet	IS-1825BSEH Datasheet
Note	This datasheet PDF includes multiple part numbers: IS-1825BSEH, IS-1825ASRH. Please refer to the document for exact specifications by model.
Additional preview pages of the IS-1825BSEH datasheet.

. 6 2.1 Absolute Maximum Ratings . .

dual in-phase output operating from zero to less than 100% duty cycle. The B versions of the parts test the delay from clock out to PWM output switching after power has been applied to the modulator (tPWM) (see Figure 2 on page 9). The SEH parts are wafer-by-wafer acceptance tested to 50krad(Si) at a low dose rate of.

📁 Similar Datasheet

IS-1845ASRH - Single Event Radiation Hardened High Speed Current Mode PWM (Intersil Corporation)
IS-1009RH - Radiation Hardened 2.5V Reference (Intersil Corporation)
IS-139ASRH - Single Event Radiation Hardened Quad Voltage Comparator (Intersil Corporation)
IS-1715ARH - Radiation Hardened Complementary Switch FET Driver (Intersil Corporation)
IS-2100ARH - Radiation Hardened High Frequency Half Bridge Driver (Intersil Corporation)
IS-2981RH - Radiation Hardened 8-Channel Source Driver (Intersil Corporation)
IS-705RH - Radiation Hardened Power-Up/Down Microprocessor Reset Circuit (Intersil Corporation)
IS-80C32 - (IS-80C32 / IS-80C52) CMOS SINGLE CHIP LOW VOLTAGE 8-BIT MICROCONTROLLER (Integrated Silicon Solution)

Other Datasheets by Intersil

Published: Feb 18, 2018 |