Datasheet4U Logo Datasheet4U.com

ISL75052SEH - High Voltage LDO

Key Features

  • DLA SMD 5962-13220.
  • Input supply range 4.0V to 13.2V.
  • Output current up to 1.5A at TJ = +150°C.
  • Best in class accuracy ±1.5% - Over line, load, and temperature.
  • Ultra low dropout: - 75mV dropout (typical) at 0.5A - 225mV dropout (typical) at 1.5A.
  • Noise of 100µVRMS (typical) between 300Hz to 300kHz.
  • SET mitigation with no added filtering/diodes.
  • Shutdown current of 165µA (typical).
  • Externally adjustable output volt.

📥 Download Datasheet

Full PDF Text Transcription for ISL75052SEH (Reference)

Note: Below is a high-fidelity text extraction (approx. 800 characters) for ISL75052SEH. For precise diagrams, and layout, please refer to the original PDF.

ISL75052SEH, ISL73052SEH 1.5A, Radiation Hardened, Positive, High Voltage LDO DATASHEET The ISL75052SEH and ISL73052SEH are radiation hardened, single output LDOs specifi...

View more extracted text
SEH and ISL73052SEH are radiation hardened, single output LDOs specified for an output current of 1.5A. The devices operate from an input voltage range of 4.0V to 13.2V and provide for output voltages of 0.6V to 12.7V. The output is adjustable based on a resistor divider setting. Dropout voltages as low as 75mV (at 0.5A) typical can be realized using the devices. This allows you to improve the system efficiency by lowering VIN to nearly VOUT. The ENABLE feature allows the part to be placed into a low shutdown current mode of 165µA (typical). When enabled, the device operates with a low ground current of 11mA (typical), whi