Datasheet4U Logo Datasheet4U.com

ACS175MS - Radiation Hardened Quad D-Type Flip- Flop

Description

only.

Intersil Corporation reserves the right to make changes in circuit design and/or specifications at any time without notice.

Accordingly, the reader is cautioned to verify that data sheets are current before placing orders.

Features

  • QML Qualified Per MIL-PRF-38535 Requirements.
  • 1.25 Micron Radiation Hardened SOS CMOS.
  • Radiation Environment - Latch-Up Free Under Any Conditions - Total Dose (Max. ).
  • . . 3 x 105 RAD(Si) - SEU Immunity.
  • . . . 100MeV/(mg/cm2).
  • Input Logic Levels. . . . VIL = (0.3)(VCC), VIH = (0.7)(VCC).
  • Output Current.

📥 Download Datasheet

Datasheet preview – ACS175MS

Datasheet Details

Part number ACS175MS
Manufacturer Intersil Corporation
File Size 39.21 KB
Description Radiation Hardened Quad D-Type Flip- Flop
Datasheet download datasheet ACS175MS Datasheet
Additional preview pages of the ACS175MS datasheet.

📁 Similar Datasheet

  • ACS1790T - PLL Frequency Synthesizer (Semtech)
  • ACS101A - Acapella Optical Modem (Semtech Corporation)
  • ACS102-5T1 - AC LINE SWITCH (STMicroelectronics)
  • ACS102-5TA - AC LINE SWITCH (STMicroelectronics)
  • ACS102-6T - Transient protected AC switch (STMicroelectronics)
  • ACS102A - ACS102A Fiber Modem (Semtech Corporation)
  • ACS103 - Acapella Optical Modem (Semtech Corporation)
  • ACS104A - Fiber Modem (Semtech Corporation)
  • ACS108 - Overvoltage protected AC switch (STMicroelectronics)
  • ACS108-5SA - AC LINE SWITCH (STMicroelectronics)
Other Datasheets by Intersil Corporation
  • ACS174MS - Radiation Hardened Hex D-Type Flip-Flop
  • ACS109MS - Radiation Hardened Dual J-K Flip-Flop
  • ACS10MS - Radiation Hardened Triple Three-Input NAND Gate
  • ACS112MS - Radiation Hardened Dual J-K Flip-Flop
  • ACS11MS - Radiation Hardened Triple 3-Input AND Gate
  • ACS125MS - Radiation Hardened Quad Buffer
  • ACS132MS - Radiation Hardened Quad 2-Input NAND Schmitt Trigger
  • ACS138MS - Radiation Hardened 3-to-8 Line Decoder/Demultiplexer

Full PDF Text Transcription

Click to expand full text
ACS175MS Data Sheet July 1999 File Number 4763 Radiation Hardened Quad D-Type FlipFlop with Reset The Radiation Hardened ACS175MS is a Quad D-Type Flip-Flop with Reset. Information at the D input is transferred to the Q and Q outputs on the positive-going transition of the clock. All four flip-flops are controlled by a common clock (CP) and a common reset (MR). Resetting is accomplished by a LOW level independent of the clock. All inputs are buffered and the outputs are designed for balanced propagation delay and transition times. The ACS175MS is fabricated on a CMOS Silicon on Sapphire (SOS) process, which provides an immunity to Single Event Latch-up and the capability of highly reliable performance in any radiation environment.
Published: |