900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf




Intersil Electronic Components Datasheet

HIN213 Datasheet

+5V Powered RS-232 Transmitters/Receivers with 0.1Microfarad External Capacitors

No Preview Available !

TM
Data Sheet
HIN201 thru HIN213
May 2000 File Number 3980.8
+5V Powered RS-232
Transmitters/Receivers with 0.1Microfarad
External Capacitors
The HIN201-HIN213 family of RS-232 transmitters/receivers
interface circuits meet all ElA RS-232E and V.28
specifications, and are particularly suited for those
applications where ±12V is not available. They require a
single +5V power supply (except HIN201) and feature
onboard charge pump voltage converters which generate
+10V and -10V supplies from the 5V supply. The HIN203
and HIN205 require no external capacitors and are ideally
suited for applications where circuit board space is critical.
The family of devices offers a wide variety of RS-232
transmitter/receiver combinations to accommodate various
applications (see Selection Table).
The HIN205, HIN206, HIN211 and HIN213 feature a low
power shutdown mode to conserve energy in battery
powered applications. In addition, the HIN213 provides two
active receivers in shutdown mode allowing for easy
“wakeup” capability.
The drivers feature true TTL/CMOS input compatibility, slew
rate-limited output, and 300power-off source impedance.
The receivers can handle up to ±30V input, and have a 3k
to 7kinput impedance. The receivers also feature
hysteresis to greatly improve noise rejection.
Applications
Features
• Meets All RS-232E and V.28 Specifications
• HIN203 and HIN205 Require No External Capacitors
• Requires Only 0.1µF or Greater External Capacitors
• High Data Rate. . . . . . . . . . . . . . . . . . . . . . . . . . .120kbit/s
• Two Receivers Active in Shutdown Mode (HIN213)
• Requires Only Single +5V Power Supply
- (+5V and +12V - HIN201)
• Onboard Voltage Doubler/Inverter
• Low Power Consumption (Typ) . . . . . . . . . . . . . . . . . 5mA
• Low Power Shutdown Function (Typ) . . . . . . . . . . . . 1µA
• Three-State TTL/CMOS Receiver Outputs
• Multiple Drivers
- ±10V Output Swing for +5V lnput
- 300Power-Off Source Impedance
- Output Current Limiting
- TTL/CMOS Compatible
- 30V/µs Maximum Slew Rate
• Multiple Receivers
- ±30V Input Voltage Range
- 3kto 7kInput Impedance
- 0.5V Hysteresis to Improve Noise Rejection
• Any System Requiring RS-232 Communications Port
- Computer - Portable, Mainframe, Laptop
- Peripheral - Printers and Terminals
- Instrumentation
- Modems
Selection Table
PART
NUMBER
HIN201
HIN202
HIN203
HIN205
HIN206
HIN207
HIN208
HIN211
HIN213
POWER SUPPLY
VOLTAGE
+5V and +9V to 13.2V
+5V
+5V
+5V
+5V
+5V
5V
+5V
+5V
NUMBER OF
RS-232
DRIVERS
2
2
2
5
4
5
4
4
4
NUMBER OF
RS-232
RECEIVERS
2
2
2
5
3
3
4
5
5
NUMBER OF
0.1µF
EXTERNAL
CAPACITORS
2 Capacitors
4 Capacitors
None
None
4 Capacitors
4 Capacitors
4 Capacitors
4 Capacitors
4 Capacitors
LOW POWER
SHUTDOWN/TTL
THREE-STATE
No/No
No/No
No/No
Yes/Yes
Yes/Yes
No/No
No/No
Yes/Yes
Yes/Yes
NUMBER OF
RECEIVERS
ACTIVE IN
SHUTDOWN
0
0
0
0
0
0
0
0
2
3-1
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 321-724-7143 | Intersil and Design is a trademark of Intersil Corporation. | Copyright © Intersil Corporation 2000


Intersil Electronic Components Datasheet

HIN213 Datasheet

+5V Powered RS-232 Transmitters/Receivers with 0.1Microfarad External Capacitors

No Preview Available !

HIN201 thru HIN213
Ordering Information
PART NO.
HIN201CB
HIN201IB
HIN202CP
HIN202CB
HIN202IP
HIN202CA
HIN202IA
HIN202IB
HIN202CBN
HIN202IBN
HIN203CP
HIN203CB
HIN205CP
HIN206CP
HIN206CB
HIN206CA
HIN206IP
HIN206IB
HIN206IA
HIN207CP
TEMP.
RANGE (oC)
PACKAGE
0 to 70 16 Ld SOIC (W)
-40 to 85 16 Ld SOIC (W)
0 to 70 16 Ld PDIP
0 to 70 16 Ld SOIC (W)
-40 to 85 16 Ld PDIP
0 to 70 16 Ld SSOP
-40 to 85 16 Ld SSOP
-40 to 85 16 Ld SOIC (W)
0 to 70 16 Ld SOIC (N)
-40 to 85 16 Ld SOIC (N)
0 to 70 20 Ld PDIP
0 to 70 20 Ld SOIC (W)
0 to 70 24 Ld PDIP (W)
0 to 70 24 Ld PDIP (N)
0 to 70 24 Ld SOIC
0 to 70 24 Ld SSOP
-40 to 85 24 Ld PDIP (N)
-40 to 85 24 Ld SOIC
-40 to 85
24 Ld SSOP
0 to 70 24 Ld PDIP (N)
PKG. NO.
M16.3
M16.3
E16.3
M16.3
E16.3
M16.209
M16.209
M16.3
M16.15
M16.15
E20.3
M20.3
E24.6
E24.3
M24.3
M24.209
E24.3
M24.3
M24.209
E24.3
PART NO.
TEMP.
RANGE (oC)
PACKAGE
PKG. NO.
HIN207CB
0 to 70
24 Ld SOIC
M24.3
HIN207CA
0 to 70 24 Ld SSOP
M24.209
HIN207IP
-40 to 85 24 Ld PDIP (N)
E24.3
HIN207IB
-40 to 85 24 Ld SOIC
M24.3
HIN207IA
-40 to 85 24 Ld SSOP
M24.209
HIN208CP
0 to 70 24 Ld PDIP (N)
E24.3
HIN208CB
0 to 70 24 Ld SOIC
M24.3
HIN208CA
0 to 70 24 Ld SSOP
M24.209
HIN208IP
-40 to 85 24 Ld PDIP (N)
E24.3
HIN208IB
-40 to 85 24 Ld SOIC
M24.3
HIN208IA
-40 to 85 24 Ld SSOP
M24.209
HIN211CB
0 to 70 28 Ld SOIC
M28.3
HIN211CA
0 to 70 28 Ld SSOP
M28.209
HIN211IB
-40 to 85 28 Ld SOIC
M28.3
HIN211IA
-40 to 85 28 Ld SSOP
M28.209
HIN213CB
0 to 70 28 Ld SOIC
M28.3
HIN213CA
0 to 70 28 Ld SSOP
M28.209
HIN213IB
-40 to 85 28 Ld SOIC
M28.3
HIN213IA
-40 to 85 28 Ld SSOP
M28.209
NOTE: Most surface mount devices are available on tape and reel;
add “-T” to suffix.
Pin Descriptions
PIN
VCC
V+
V-
GND
FUNCTION
Power Supply Input 5V ±10%, 5V ±5% (HIN207, HIN203, and HIN205).
Internally generated positive supply (+10V nominal), HIN201 requires +9V to +13.2V.
Internally generated negative supply (-10V nominal).
Ground Lead. Connect to 0V.
C1+ External capacitor (+ terminal) is connected to this lead.
C1- External capacitor (- terminal) is connected to this lead.
C2+ External capacitor (+ terminal) is connected to this lead.
C2-
TIN
TOUT
RIN
ROUT
EN, EN
SD, SD
NC
External capacitor (- terminal) is connected to this lead.
Transmitter Inputs. These leads accept TTL/CMOS levels. An internal 400kpull-up resistor to VCC is connected to each lead.
Transmitter Outputs. These are RS-232 levels (nominally ±10V).
Receiver Inputs. These inputs accept RS-232 input levels. An internal 5kpull-down resistor to GND is connected to each input.
Receiver Outputs. These are TTL/CMOS levels.
Enable Input. This is an active low input which enables the receiver outputs. With EN = 5V, (HIN213 EN = 0V), the outputs are placed
in a high impedance state.
Shutdown Input. With SD = 5V (HIN213 SD = 0V), the charge pump is disabled, the receiver outputs are in a high impedance state
(except R4 and R5 of HIN213) and the transmitters are shut off.
No Connect. No connections are made to these leads.
3-2


Part Number HIN213
Description +5V Powered RS-232 Transmitters/Receivers with 0.1Microfarad External Capacitors
Maker Intersil Corporation
Total Page 13 Pages
PDF Download

HIN213 Datasheet PDF

View PDF for Mobile








Similar Datasheet

1 HIN210 (HIN200 - HIN213) +5V Powered RS-232 Transmitters/Receivers
Harris Corporation
2 HIN211 +5V Powered RS-232 Transmitters/Receivers with 0.1Microfarad External Capacitors
Intersil Corporation
3 HIN211 +5V Powered RS-232 Transmitters/Receivers
Renesas
4 HIN211 (HIN200 - HIN213) +5V Powered RS-232 Transmitters/Receivers
Harris Corporation
5 HIN211A High Speed +5V Powered RS-232 Transmitters/Receivers
Intersil Corporation
6 HIN211E +/-15kV/ ESD-Protected/ +5V Powered/RS-232 Transmitters/Receivers
Intersil Corporation
7 HIN211E RS-232 Transmitters/Receivers
Renesas
8 HIN212 (HIN200 - HIN213) +5V Powered RS-232 Transmitters/Receivers
Harris Corporation
9 HIN213 +5V Powered RS-232 Transmitters/Receivers with 0.1Microfarad External Capacitors
Intersil Corporation





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy