Datasheet4U Logo Datasheet4U.com

HIP5062 - Power Control IC Single Chip Dual Switching Power Supply

Description

PAD NUMBER 1, 4, 7 2, 3, 5, 6 8 DESIGNATION S2 D2 VDDP2 DESCRIPTION Source pads for the channel 2 regulator.

Drain pads for the channel 2 regulator.

This pad is the power input for the channel 2 DMOS gate driver and also is used to decouple the high current pulses to the output driver transistors.

Features

  • Two Current Mode Control Regulators Two 60V, 5A On-chip DMOS Transistors Thermal Protection Over-Voltage Protection Over-Current Protection 1MHz Operation or External Clock Synchronization Output On-Chip Reference Voltage - 5.1V Output Rise and Fall Times ~ 3ns Designed for 26V to 42V Operation.

📥 Download Datasheet

Datasheet preview – HIP5062

📁 Similar Datasheet

  • HIP5600 - Thermally Protected High Voltage Linear Regulator (Harris Corporation)
  • HIP0045 - 1A/50V Octal Low Side Power Driver (Renesas)
  • HIP0050 - 0.3A/50V Octal Low Side Power Driver (Renesas)
  • HIP0051 - 0.25A/50V Octal Low Side Power Driver (Renesas)
  • HIP0060 - 50V Quad Low Side Power Driver (Renesas)
  • HIP0061 - 3-Transistor Common Source ESD Protected Power MOSFET Array (Renesas)
  • HIP0080 - Quad Inverting Power Driver (Renesas)
  • HIP0081 - Quad Inverting Power Driver (Renesas)
  • HIP0082 - Quad Power Driver (Renesas)
  • HIP0084 - Quad Power Driver (Renesas)
Other Datasheets by Intersil Corporation
  • HIP5060 - Power Control IC Single Chip PowerSupply
  • HIP5061 - 7A/ High Efficiency Current Mode Controlled PWM Regulator
  • HIP5063 - Power Control IC Single Chip Power Supply
  • HIP5010 - 7V/ 17A SynchroFET Complementary Drive Synchronous Half-Bridge
  • HIP5011 - 7V/ 17A SynchroFET Complementary Drive Synchronous Half-Bridge
  • HIP5015 - 7V/ 7A SynchroFET Complementary Drive Synchronous Half-Bridge
  • HIP5016 - 7V/ 7A SynchroFET Complementary Drive Synchronous Half-Bridge
  • HIP5020 - Integrated-Power Buck Converter Controller with Synchronous Rectification

Full PDF Text Transcription

Click to expand full text
® No T ent UC OD lacem R E P Re p LET ded O n S O B m me o c e R HIP5062 August 1998 File Number 3208.2 Power Control IC Single Chip Dual Switching Power Supply The HIP5062 is a complete power control IC, incorporating two high power DMOS transistors, CMOS logic and two low level analog control circuits on the same Intelligent Power IC. Both the standard “Boost” and the “SEPIC” (SingleEnded Primary Inductance Converter) power supply topologies are easily implemented with this single control IC. Special power transistor current sensing circuitry is incorporated that minimizes losses due to the monitoring circuitry. Moreover, over-temperature and over-voltage detection circuitry is incorporated within the IC to monitor the chip temperature and the actual power supply output voltage.
Published: |