Datasheet4U Logo Datasheet4U.com

HIP6601A - Synchronous Rectified Buck MOSFET Drivers

General Description

UGATE (Pin 1), (Pin 16 QFN) Upper gate drive output.

Connect to gate of high-side power N-Channel MOSFET.

BOOT (Pin 2), (Pin 2 QFN) Floating bootstrap supply pin for the upper gate drive.

Key Features

  • Drives Two N-Channel MOSFETs.
  • Adaptive Shoot-Through Protection.
  • Internal Bootstrap Device.
  • Supports High Switching Frequency - Fast Output Rise Time - Propagation Delay 30ns.
  • Small 8 Lead SOIC and EPSOIC and 16 Lead QFN Packages.
  • Dual Gate-Drive Voltages for Optimal Efficiency.
  • Three-State Input for Output Stage Shutdown.
  • Supply Under Voltage Protection.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
HIP6601 Synchronous-Rectified Buck MOSFET Drivers Intersil
HIP6601B Synchronous Rectified BuckMOSFET Drivers Renesas
HIP6602 Dual Channel Synchronous-Rectified Buck MOSFET Driver Renesas
HIP6602 Dual Channel Synchronous-Rectified Buck MOSFET Driver Intersil
HIP6602B Dual Channel Synchronous Rectified Buck MOSFET Driver Renesas

Other Datasheets by Intersil (Renesas)

Part Number Description
HIP6603A Synchronous Rectified Buck MOSFET Drivers
HIP6604 Synchronous Rectified Buck MOSFET Drivers
HIP6002 Rectifier (PWM) Controller and Output Voltage Monitor
HIP6003 Buck Pulse-Width Modulator (PWM) Controller and Output Voltage Monitor
HIP6005A Buck Pulse-Width Modulator (PWM) Controller and Output Voltage Monitor

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
RECOMMEONBHD®SIEPOD6L6RE0ET1PEBDL,aPAHtRaCIPOES6DMh6U0eEC3eNBtTT PRODUCT HIP6601A, HIP6603A, HIP6604 August 2004 FN4884.5 Synchronous Rectified Buck MOSFET Drivers The HIP6601A, HIP6603A and HIP6604 are high frequency, dual MOSFET drivers specifically designed to drive two power N-Channel MOSFETs in a synchronous rectified buck converter topology. These drivers combined with a HIP63xx or an ISL65xx Multi-Phase Buck PWM controller form a complete core-voltage regulator solution for advanced microprocessors. The HIP6601A drives the lower gate in a synchronous rectifier to 12V, while the upper gate can be independently driven over a range from 5V to 12V. The HIP6603A drives both upper and lower gates over a range of 5V to 12V.