X9409 Datasheet Quad Digitally Controlled Potentiometers

Manufacturer: Intersil (now Renesas)

X9409 quad digitally controlled potentiometers by Intersil (now Renesas) - Datasheet Preview

Datasheet Details

Part number	X9409
Manufacturer	Intersil (now Renesas)
File Size	1.33 MB
Description	Quad Digitally Controlled Potentiometers
Download	X9409 Download (PDF)

Overview

OBSOLETE PRODUCT DATASHEET NO RECOMMENDED REPLACEMENT contact our Technical Support Center at X9409 1-888-INTERSIL or www.intersil.com/tsc FN8192 Low Noise/Low Power/2-Wire Bus Quad Digitally Controlled Potentiometers Rev.6.00 (XDCP) Sep 3, 2015 The X9409 integrates 4 digitally controlled potentiometers (XDCP) on a monolithic CMOS integrated microcircuit.

The digitally controlled potentiometer is implemented using 63 resistive elements in a series array.

Between each element are tap points connected to the wiper terminal through switches.

Key Features

Four potentiometers per package.
64 resistor taps.
2-wire serial interface for write, read and transfer operations of the potentiometer.
50Ω wiper resistance, typical at 5V.
Four nonvolatile data registers for each potentiometer.
Nonvolatile storage of multiple wiper position.
Power-on recall. Loads saved wiper position on power-up standby current < 1µA typical.
System VCC: 2.7V operation.
10kΩ end-to-end resistanc.

More Datasheets from Intersil (now Renesas)

Part Number	Description
X9410	Dual Digitally Controlled Potentiometer