Datasheet4U Logo Datasheet4U.com

NJW4828-A - Parallel Input 8-channel Sink Driver

General Description

The NJW4828-A is 8-channel sink driver with 600mA output.

The input circuits have built-in flip-flops, and they can latch the input data signals by using the LP signal as trigger.

The CLRb input has built-in filter for noise immunity.

Key Features

  • 8-channel Parallel Input Parallel Output.
  • Built-in Flip-Flops for latching Input data.
  • Supply Voltage.
  • Output Voltage VDD=4.0 to 5.5V VDS=up to 40V (45V Rating).
  • Output Current 300mA(DC) / ch. 600mA(Peak) / ch.
  • Built-in Noise Filter (CLRb Pin).
  • Protection Circuit OCP, TSD.
  • Output Slew Rate Control.
  • Operating Temperature Topr=-40 to 125°C.
  • Package Outline SDIP22.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
NJW4820 Single Low Side Switch New Japan Radio
NJW4800 30V/4A Half Bridge Driver New Japan Radio
NJW4801 Small PKG Half Bridge Driver New Japan Radio
NJW4810 35V / 1A H-Bridge Driver New Japan Radio
NJW4810A Dual Half Bridge Driver New Japan Radio

Other Datasheets by New Japan Radio

Part Number Description
NJW4822 1-Channel Low Side Switch
NJW4108 Lithium-ion Battery Charger Controller
NJW4119 BUCK SWITCHING REGULATOR
NJW4120 Lithium-Battery Charger Controller
NJW4124 Lithium-Battery Charger Controller

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
NJW4828-A Parallel Input 8-channel Sink Driver with Flip-Flops ■FEATURES ●8-channel Parallel Input Parallel Output ●Built-in Flip-Flops for latching Input data ●Supply Voltage ●Output Voltage VDD=4.0 to 5.5V VDS=up to 40V (45V Rating) ●Output Current 300mA(DC) / ch. 600mA(Peak) / ch. ●Built-in Noise Filter (CLRb Pin) ●Protection Circuit OCP, TSD ●Output Slew Rate Control ●Operating Temperature Topr=-40 to 125°C ●Package Outline SDIP22 ■GENERAL DESCRIPTION The NJW4828-A is 8-channel sink driver with 600mA output. The input circuits have built-in flip-flops, and they can latch the input data signals by using the LP signal as trigger. The CLRb input has built-in filter for noise immunity.