Datasheet4U Logo Datasheet4U.com

JW1237 - Adaptive 100/120Hz Current Ripple Remover

Datasheet Summary

Description

JW1237, integrated with 150V NMOSFET, is used to drive a LED string, and remove the 100/120Hz LED current ripple on AC/DC power by a capacitor between VC and GND.

The adaptive technology ensures minimum power dissipation on JW1237 while removing LED current ripple.

Features

  • Adaptive 100/120Hz current ripple remover 150V high voltage.

📥 Download Datasheet

Datasheet preview – JW1237

Datasheet Details

Part number JW1237
Manufacturer JoulWatt
File Size 819.83 KB
Description Adaptive 100/120Hz Current Ripple Remover
Datasheet download datasheet JW1237 Datasheet
Additional preview pages of the JW1237 datasheet.

📁 Similar Datasheet

  • JW1236B - Full color LED control chip (ETC)
  • JW1758A - Offline Step-down LED Controller (SPMICRO)
  • JW1758B - Offline Step-down LED Controller (SPMICRO)
  • JW1758C - Offline Step-down LED Controller (SPMICRO)
  • JW1760 - Non-Isolated Buck LED Driver Controller (SPMICRO)
  • JW1763B - Non-isolated buck LED driver controller (SPMICRO)
  • JW1763C - Non-isolated buck LED driver controller (SPMICRO)
  • JW1769A - Offline Step-down LED Regulator (SPMICRO)
  • JW1769B - Offline Step-down LED Regulator (SPMICRO)
  • JW1769C - Offline Step-down LED Regulator (SPMICRO)
Other Datasheets by JoulWatt
  • JW1232 - Adaptive 100/120Hz Current Ripple Remover
  • JW1233 - Adaptive 100/120Hz Current Ripple Remover
  • JW1210 - Scalable Adaptive 100/120Hz Current Ripple Remover
  • JW1220 - Controller for Adaptive 100/120Hz Current Ripple Removing Circuit
  • JW1221 - Controller for Adaptive 100/120Hz Current Ripple Removing Circuit
  • JW1221A - Controller for Adaptive 100/120Hz Current Ripple Removing Circuit
  • JW1120 - 20V Synchronous Buck LED Driver
  • JW1501A - Multi-Mode Primary-Side Regulation

Full PDF Text Transcription

Click to expand full text
JW1237 Adaptive 100/120Hz Current Ripple Remover With High Voltage MOSFET Integrated Parameters Subject to Change Without Notice DESCRIPTION JW1237, integrated with 150V NMOSFET, is used to drive a LED string, and remove the 100/120Hz LED current ripple on AC/DC power by a capacitor between VC and GND. The adaptive technology ensures minimum power dissipation on JW1237 while removing LED current ripple. JW1237 clamps the input voltage on VIN pin to 31V. Only one resistor is needed when the output voltage of AC/DC power is higher than 31V. JW1237 allows user to setup maximum LED current by the sensing resistor between VS pin and GND, which protects JW1237 from being damaged when LED short connected or hot-plug.
Published: |