Datasheet4U Logo Datasheet4U.com

JW1210 - Scalable Adaptive 100/120Hz Current Ripple Remover

General Description

AC/DC power by a capacitor between VC and GND.

JW1210 allows user to setup the maximum voltage on LED pin by connect a resistor between VLMT and GND.

Key Features

  • Scalable Adaptive 100/120Hz Current Ripple Remover 5V~60V Input Voltage Built-in LED Driving MOSFET LED Voltage Low to 0.65V @ 0.25A Programmable LED Current Ripple Programmable maximum LED Voltage Over thermal protection eSOP8 and TO220-5L package.

📥 Download Datasheet

Datasheet Details

Part number JW1210
Manufacturer JoulWatt
File Size 567.58 KB
Description Scalable Adaptive 100/120Hz Current Ripple Remover
Datasheet download datasheet JW1210 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
JW1236B Full color LED control chip ETC
JW1758A Offline Step-down LED Controller SPMICRO
JW1758B Offline Step-down LED Controller SPMICRO
JW1758C Offline Step-down LED Controller SPMICRO
JW1760 Non-Isolated Buck LED Driver Controller SPMICRO

Other Datasheets by JoulWatt

Part Number Description
JW1220 Controller for Adaptive 100/120Hz Current Ripple Removing Circuit
JW1221 Controller for Adaptive 100/120Hz Current Ripple Removing Circuit
JW1221A Controller for Adaptive 100/120Hz Current Ripple Removing Circuit
JW1232 Adaptive 100/120Hz Current Ripple Remover
JW1233 Adaptive 100/120Hz Current Ripple Remover

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Parameters Subject to Change Without Notice JW1210 Scalable Adaptive 100/120Hz Current Ripple Remover 350mA maximum input current FEATURES Scalable Adaptive 100/120Hz Current Ripple Remover 5V~60V Input Voltage Built-in LED Driving MOSFET LED Voltage Low to 0.65V @ 0.25A Programmable LED Current Ripple Programmable maximum LED Voltage Over thermal protection eSOP8 and TO220-5L package APPLICATIONS LED Lighting DESCRIPTION JW1210 is used to drive a LED string (＜60V), and remove the 100/120Hz current ripple on AC/DC power by a capacitor between VC and GND. JW1210 allows user to setup the maximum voltage on LED pin by connect a resistor between VLMT and GND.