Datasheet4U Logo Datasheet4U.com

ML12061 - Crystal Oscillator

General Description

m 42 mA to 23 mA for the ML12061.

Key Features

  • = 10 MHz RE = 5 Ω.
  • RS = 15 kΩ is inserted only for test purposes. When used with the above specified crystal, it guarantees oscillation with any crystal which has an equivalent series resistance 155 Ω Rp: will improve start up problems value: 200.
  • 500 Ω VCC = + 2.0 Vdc 0.1 µF 1 0.1 µF 0.1 µF 4 3 2 450 450 6 5.
  • RS Rp 8 9 VEE =.
  • 3.0 Vdc 0.1 µF Crystal Page 5 of 9 www. lansdale. com Issue A Free Datasheet http://www. datasheet4u. com/ ML12061.

📥 Download Datasheet

Datasheet Details

Part number ML12061
Manufacturer LANSDALE
File Size 638.60 KB
Description Crystal Oscillator
Datasheet download datasheet ML12061 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
ML12040 PHASE FREQUENCY DETECTOR ETC
ML120G10 LASER DIODES Mitsubishi
ML120G14 LASER DIODES Mitsubishi
ML120G18 MITSUBISHI LASER DIODES Mitsubishi Electric Semiconductor
ML120G18 LASER DIODES Mitsubishi Electric

Other Datasheets by LANSDALE

Part Number Description
ML13156 Wideband FM IF System

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
ML12061 Crystal Oscillator Legacy Device: Motorola MC12061 The ML12061 is for use with an external crystal to form a crystal controlled oscillator. In addition to the fundamental series mode crystal, two bypass capacitors are required (plus usual power supply pin bypass capacitors). Translators are provided internally for MECL and TTL outputs. • • • • Frequency Range = 2.0 to 20 MHz Operating Temperature Range = 0 to + 70°C Single Supply Operation: +5.0 Vdc or –5.2 V DC Three Outputs Available: 1.Complementary Sine Wave (600 mVpp typ) 2.Complementary MECL 3.Single Ended TTL Figure 1. Block Diagram Bias Bypass 0.1 µF 7 VCC AGC Filter 0.