Datasheet4U Logo Datasheet4U.com

LTC4280 - Hot Swap Controller

General Description

The LTC®4280 Hot Swap™ controller allows a board to be safely inserted and removed from a live backplane.

Using an external N-channel pass transistor, board supply voltage and inrush current are ramped up at an adjustable rate.

Key Features

  • n n n n n n n n n n n n.

📥 Download Datasheet

More Datasheets from Linear Technology (now Analog Devices)

Part Number Description
LTC4282 High Current Hot Swap Controller
LTC4210-1 Hot Swap Controller
LTC4210-2 Hot Swap Controller
LTC4210-3 Hot Swap Controller
LTC4210-4 Hot Swap Controller
LTC4211 Hot Swap Controller
LTC4212 Hot Swap Controller
LTC4213 Electronic Circuit Breaker
LTC4214-1 Negative Low Voltage Hot Swap Controllers
LTC4214-2 Negative Low Voltage Hot Swap Controllers

Full PDF Text Transcription for LTC4280 (Reference)

Note: Below is a high-fidelity text extraction (approx. 800 characters) for LTC4280. For precise diagrams, tables, and layout, please refer to the original PDF.

View original datasheet text
www.DataSheet4U.com LTC4280 Hot Swap Controller with 2 I C Compatible Monitoring FEATURES n n n n n n n n n n n n DESCRIPTION The LTC®4280 Hot Swap™ controller allows a board to be safely inserted and removed from a live backplane. Using an external N-channel pass transistor, board supply voltage and inrush current are ramped up at an adjustable rate. An I2C interface and onboard ADC allow for monitoring of load current, voltage and fault status. The device features adjustable analog foldback current limit and a FILTER pin which configures the time spent in overcurrent before declaring a fault. An I2C interface may configure the part to latch off or automatically restart after the LTC4280 detects a current limit fault.