900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf






Lontium

LT2911R Datasheet Preview

LT2911R Datasheet

2-Port LVDS/TTL to MIPI Converter

No Preview Available !

Lontium Semiconductor
LT2911R Datasheet R2.0
LONTIUM SEMICONDUCTOR
CORPORATION
ClearEdgeTechnology
LT2911R
2-Port LVDS/TTL to MIPI Converter
With Frame Rotation
Datasheet
We produce mixed-signal products for a better digital world!
Confidential
1




Lontium

LT2911R Datasheet Preview

LT2911R Datasheet

2-Port LVDS/TTL to MIPI Converter

No Preview Available !

Lontium Semiconductor
1. Features
Dual-Port LVDS Receiver
Compatible with VESA and JEIDA standard
1~2 Configurable Port
Up to 1080P 60Hz
Data Port ,Data Lane and Polarity Swapping
Internal Rterm Calibration with Less than 5% Error
Programmable Equalization
Support input Dessc(30KHz±5%)
MIPI Transmitter
Compliant with DCS1.02, D-PHY1.2 ,DSI1.2 and CSI-
2 1.00
1 Clock Lane and 1~4 Configurable Data Lanes
Two Port Simultaneous Display Supported
Up to 1.8Gb/s per Data Lane
Resolution Up to 1080P 60Hz
Data Lane and Polarity Swapping
Both Non-Burst and Burst Video Mode Supported
Support RGB666, Loosely RGB666, RGB888,
RGB565, 16-bit YCbCr4:2:2, 24-bit YCbCr 4:2:2
Video Format
DDR3 Controller
Compliant with DDR3 JESD79-3F
BandWidth up to 1866Mbps
Support X16 SDRAM Organization
Programmable CAS Latency
BL8 Supported Only
Programmable Output Driver Impedance
SR Supported
Miscellaneous
1.5V, 1.8V Power Supply
90/270 Degree Video Rotation
External DDR3 SDRAM
Support 100KHz and 400KHz I2C Slave
LT2911R Datasheet R2.0
External 25MHz Crystal Reference Clock
Temperature Range: -40°C ~ +85°C
Packaged in QFN128 14mm x 14mm
2. General Description
The Lontium® LT2911R is a high performance Dual-Port
LVDS to MIPIDSI/CSI-2 bridge chip with Video Frame
Rotation between AP and mobile display panel or camera.
The LT2911R can be configured as single-port or dual-port
with optional De-SSC function. The bridge converts
formatted video data stream from LVDS source to MIPI
DSI/CSI-2 transmitter output with frame rotation 90/270
degree.
For MIPI DSI/CSI-2 output, the LT2911R features a single
port MIPI DSI or CSI-2 transmitter with 1 high-speed clock
lane and 1~4 configurable high-speed data lanes operating
at maximum 1.8Gb/s/lane, which can support a total
bandwidth of up to 7.2Gb/s. The LT2911R supports both
Non-Burst and Burst DSI/CSI data transferring, as well as
Command Mode through Lane-0. And also, the LT2911R
can be configured as two port simultaneous display mode.
The LT2911R is fabricated in advanced CMOS process and
implemented in 14mm x 14mm QFN128 package. This
package is RoHS compliant and specified to operate from -
40°C to +85°C.
3. Applications
Mobile systems
Cellular handsets
Digital video cameras
Digital still cameras
Tablet PC, Notebook PC
Car Display and Camera System
We produce mixed-signal products for a better digital world!
Confidential
2


Part Number LT2911R
Description 2-Port LVDS/TTL to MIPI Converter
Maker Lontium
PDF Download

LT2911R Datasheet PDF






Similar Datasheet

1 LT2911R 2-Port LVDS/TTL to MIPI Converter
Lontium





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy