LP5302 Description
The LP5302 is an Over-Voltage-Protection (OVP) and programmable Over-Current-Protection (OCP) device. The device will switch off internal MOSFET to disconnect VIN to VOUT to protect load when any of input voltage, input current over the threshold. The Over temperature protection (OTP) function monitors chip temperature to protect the device.
LP5302 Key Features
- Input Voltage Range: 3.5V to 36V
- Typical Output Power on Time: 9ms
- OVP Threshold: 6.1V
- OVP Threshold Time Less Than 1μs
- Programmable Current Limit up to 2.1A (without
- Low RDS(ON) Internal Switches:130mΩ @ 5V /1A
- Output Discharge
- Thermal Fault Protection