Datasheet4U Logo Datasheet4U.com

LP5301 - Over Voltage and Over Current Protection

Datasheet Summary

Description

The LP5301 is an Over-Voltage-Protection(OVP) and programmable Over-Current-Protection (OCP) device.

The device will switch off internal MOSFET to disconnect VIN to VOUT to protect load when any of input voltage, input current over the threshold.

Features

  • Input Voltage Range: 3.5V to 36V.
  • Typical Output Power on Time: 9ms.
  • OVP Threshold: 6.1V.
  • OVP Threshold Time Less Than 1μs.
  • Programmable Current Limit up to 2.1A.
  • Low RDS(ON) Internal Switches:130mΩ @ 5V /1A.
  • Output Discharge.
  • Thermal Fault Protection.
  • SOT23-6, DFN-8 2.
  • 2mmPackage.
  • RoHS Compliant and 100% Lead(Pb)-Free Order Information LP5301.
  • F: Pb-Free Package Type B6: SOT23-6 QV: DFN-8 Applicati.

📥 Download Datasheet

Datasheet preview – LP5301

Datasheet Details

Part number LP5301
Manufacturer Lowpowersemi
File Size 752.43 KB
Description Over Voltage and Over Current Protection
Datasheet download datasheet LP5301 Datasheet
Additional preview pages of the LP5301 datasheet.

📁 Similar Datasheet

  • LP5004 - 1000Base-T Magnetics (Link-PP)
  • LP5007 - 1000Base-T Magnetics (Link-PP)
  • LP5008 - 1000Base-T Magnetics (Link-PP)
  • LP5009 - 12-Bit PWM Ultra-low Quiescent Current I2C RGB LED Drivers (Texas Instruments)
  • LP5012 - 1000Base-T Magnetics (Link-PP)
  • LP5012 - 12-Bit PWM Ultra-low Quiescent Current I2C RGB LED Drivers (Texas Instruments)
  • LP5014 - 1000Base-T Magnetics (Link-PP)
  • LP5017 - 10Base-T Isolation Transformers (Link-PP)
  • LP5018 - I2C RGB LED Drivers (Texas Instruments)
  • LP502 - Low Distortion AGC Compression Amplifier (Gennum Corporation)
Other Datasheets by Lowpowersemi
  • LP5300 - Over Voltage and Over Current Protection
  • LP5302 - Over Voltage and Over Current Protection
  • LP5303 - Over Voltage and Over Current Protection
  • LP5306 - Over Voltage and Over Current Protection

Full PDF Text Transcription

Click to expand full text
Preliminary Datasheet LP5301 Over Voltage and Over Current Protection IC General Description The LP5301 is an Over-Voltage-Protection(OVP) and programmable Over-Current-Protection (OCP) device. The device will switch off internal MOSFET to disconnect VIN to VOUT to protect load when any of input voltage, input current over the threshold. The Over temperature protection (OTP) function monitors chip temperature to protect the device. The LP5301 is available in SOT-23-6, DFN-8 2*2mm package. Standard products are Pb-free and Halogen-free. Features  Input Voltage Range: 3.5V to 36V  Typical Output Power on Time: 9ms  OVP Threshold: 6.1V  OVP Threshold Time Less Than 1μs  Programmable Current Limit up to 2.
Published: |